Accessories Unlimited

AUSWR SWR Meter
  $24.99

An SWR meter is an essential tool for tuning your CB antenna.  This is our most popular meter.  It comes with a 3 foot coax for connecting it in line between your radio and antenna.  Instructions for tuning any CB antenna are included.

In stock
+

These heavy duty stainless steel springs are designed for use with any 3/8 x 24 threaded CB antenna up to 5 feet tall.  For 2 foot CB antennas, or...

In stock
+

Accessories Unlimited, Fiberglass, 3/8 inch x 24

This 4 foot tunable tip CB antenna is comparable to Firestik FS and Wilson fiberglass antennas.  The four food fiberglass core is wound with copper...

In stock
+

This stainless steel CB antenna mount will bolt to any flat vertical surface.  Use of U-bolts (not included) will allow mounting to horizontal or vertical posts. 

In stock
+

This mount kit allows you to easily install your Uniden PRO510XL or PRO 520XL CB radio in the dash just like a car stereo.  This is a single DIN kit,...

In stock
+

This mount was designed specifically to fit the spare tire rack for Jeeps.  The coax has a removeable PL259 connector for easy cable routing.  Uses existing bolts on the Jeep.  No drilling required!

In stock
+

This fender mount was specifically designed for 1999-2009 Ford F series trucks.  Constructed from high quality stainless steel, this mount can be installed using existing bolts under the hood. 

In stock
+

This fender mount was designed for Chevy pickups and SUV's.  This mount is constructed from quality stainless steel and includes a 3/8" x 24 threaded stud for mouting CB antennas. 

In stock
+

This mount kit allows you to easily install your CB radio in the dash just like a car stereo.  This is a single DIN kit, like most car stereos. ...

In stock
+

This is our most popular CB antenna ball mount.  This versitile type of mout allows you to mount an antenna to any flat surface.  The ball rotates 360 degrees to adjust for any angle of the mouting surface.  This mount requires you to drill holes in the mounting surface.

In stock
+

This fender mount is a universal solution for vehicles with no specific CB antenna mount made for them.  This mount will only work on vehicles with a vertical channel between the fender and hood with no turns. 

In stock
+

This magnetic CB microphone clip allows you to hang your CB mic from any metal (magnetic) surface without permanently attaching a mic clip. 

In stock
+

This fender mount was designed for newer Chevy pickups, 2010 - 2013.  It also fits some Toyota Tacoma pickups.  No drilling required on compatible pickups.  Includes CB antenna stud.

In stock
+

Tall hood mount with 18 foot coax cable and EZ on PL259 connectors. This tall fender mount is for deep groove mounting in full size pickups and cars. ...

In stock
+

3 Pin heavy duty power cord with cigarette plug. 5 feet long.  Includes inline fuse.    Works for Cobra 19, 25, and 29 series radios. ...

In stock
+

Tall hood mount with 18 foot coax cable and EZ on PL259 connectors. This tall fender mount is for deep groove mounting in full size pickups and cars. ...

In stock
+

This mount kit allows you to easily install your Uniden PRO538W CB radio in the dash just like a car stereo.  This is a single DIN kit, like most car...

In stock
+

This is a universal fender mount for vehicles that don't have a specific mount made for them.  This mount will only work on vehicles with a vertical channel between the fender and hood with no turns.

In stock
+

This fender mount was designed for Dodge pickups from 2004 to 2008.  It is constructed from durable stainless steel and can hold antennas up to 5 feet.

In stock
+

15 Watt, 8 ohm, 5 inch PA horn with 10 foot cord and 3.5mm plug.

In stock

Accessories Unlimited, 3, 4 Ft., Fiberglass, Fender Mount

Kit includes a tall hood mount with stud for deep groove mounting in full size pickups and cars.  This is our best option for domestic vehicles with no...

In stock

If you are looking for a CB antenna mount with a clean installation with no drilling holes, this is the one for you!  This mount will bolt under the...

In stock
+

Set of 2 plastic knobs for mounting CB radios.  5mm knobs are the most common size for new CB radios.  If you are unsure what size your radio...

In stock
+

This stud allows you to quickly remove your CB antenna by pressing down on the stud, twisting it counter clockwise, and pulling straight up.  The lower...

In stock
+