Astatic

If you want to step up from a basic SWR meter, consider this 3 meter high-watt meter from Astatic.  It features 3 easy to read meters (SWR, power, and...

In stock
+

This meter from Astatic combines a power meter with an SWR meter into one device.  An SWR meteer is essential to tune your CB Antenna. 

In stock
+

The Road Devil features a high gain amplifier with electronic equalization to provide maximum talk power and intelligibility even under noisy conditions.  The Road Devil is a VERY powerful microphone.

In stock
+

The Atatic D104M6B CB microphone features volume control and fits all 4 pin Cobra, Uniden, and Galaxy CB radios. Durable construction is combined with a chrome plated brass grille.

In stock
+

The Astatic 636L noise canceling 4 pin CB microphone is a favorite among professional drivers.  Astatic has a long tradition of producing quality products. 

In stock

This base CB microphone features a lock-to-talk button, ceramic cartridge, and a five conductor shielded cable with 4 pin plug. 

In stock
+

7.5 foot coiled cord 6 wires in cord Heavy duty strain relief on microphone end No plugs on either end No plugs included

In stock
+

Noise Canceling external speaker with PA and Talk Back; complete w/mounting bracket and 10' cord with 3.5 mm mini plug.

In stock
+

6 Foot RG8X coax PL259 connectors on both ends Clear outer coating shows copper braid beneath

In stock
+

This 6 foot microphone cable from Astatic can be used on any mic that has 6 or less wires.

In stock
+

This combination CB and VHF 8 foot marine antenna is a perfect fit if you have both VHF and CB radios on your boat.  The included CB/VHF splitter...

In stock
+

Astatic, 7 Ft., Fiberglass, Marine Mount

Marine CB antenna with lift and lay  mount and coax.  

In stock
+

Replacement cartridge for Astatic 636L CB microphone.

In stock
+

ASTGPK ground plane mounting kit for the Astatic/Valor/ProAm AST-6BTV 75/40/20/15/10/6M multi- band antenna. This kit also is suitable...

In stock
+

9 Foot RG8X coax PL259 connectors on both ends Grey

In stock
+

Mount assembly.  3/8" heady duty bolt mounts to surface with a 1/2" hole.  Extra heavy.

In stock
+

Requires 1/2" hole and will accept standard 3/8 " X 24" antennas or springs. Other options then the roof would be tool box or any flat surface. Coax...

In stock
+