AUJ1 Stainless Steel Fender Mount for 2007 and Newer Wrangler Jeeps

AUJ1 Fender Mount for 2007+ Wrangler Jeeps

30 days
In stock
Add to wish list


Accessories Unlimited AUJ1 Stainless Steel Fender Mount for 2007 and Newer Wrangler Jeeps. Mount your CB antenna up front where the best ground plane exists on Jeep Wranglers. Far better than attaching to the bumper, the AUJ1 fender mount positions your two-way radio antenna for best refraction. Stronger signals aimed in the optimum direction so you won’t miss out on trial talk, or over the road chatter.

If you are looking for a CB antenna mount with a clean installation with no drilling holes, the AUJ1 from Accessories Unlimited is the mount for you! The AUJ1 mount will bolt under the hood of any 2007 and newer Jeep Wrangler using existing fender bolts.

Besides location, taller is usually better when it comes to CB antennas. The AUJ1 Jeep Wrangler JK fender mount makes it easy to get even a 3 foot tall antenna clear of the roof line.

Mounted up front on the fender it’s easy for the driver to keep on an eye on the CB radio antenna and avoid low hanging objects that can damage antennas. You’ll have the option to steer clear, remove the antenna, or even find an alternative route rather than risk breakage. A CB antenna that strikes low hanging tree limbs can bend, break, or worse bend the mount and fender. Don’t risk losing your important communications medium or expensive repair bills. Install your two-way radio antenna with an AUJ1 Jeep fender mount for the ultimate durable peace of mind.

The AUJ1 is a sturdy mount that can hold up to 5 foot antennas safely. For 4 and 5 foot antennas we recommend attaching the mount with multiple bolts or screws for added support. The AUJ1 mount accepts 3/8 x 24 threaded CB antennas. A CB antenna spring is recommended for this mount.

CB World also has the AUJ1 Jeep antenna mount available in a mount kit.

A CB coax with lug connectors (hoop connectors) is recommended for this mount. For an easier install, use this Firestik® CB antenna coax.

Product features

  • High quality stainless steel mount
  • 3/8 x 24 threaded stud included
  • Holds antennas up to 5 feet tall
  • Mounts on passenger or driver side of vehicle
  • No drilling into fender required
  • One year warranty


CB Antenna Mount

Mount Type:
Hood/Fender Mount
Thread Type:
3/8" x 24


Great mount. Attractive and very sturdy. Looks and mounts just like the pictures show. I was concerned about the mount possibly rubbing the finder or hood but it does not touch either. I am using the mount for a ham antenna with an nmo base. Just drilled out the hole with a multi step drill bit. No trouble at all. I would definitely recommend to a friend.
This was the only mount I could find that allowed for no-drilling on my 2008 JKU. I used it for a Ham radio antenna so needed a bitter antenna mount hole for NMO. It took some patience but I was able to use a Dremmel to make the hole larger. I'll be getting another for a mobile scanner setup.
Great mount, strong.
Works perfect on an 07 wrangler! Great fit.
This was the only fender mount I could find for my Wrangler. It fits perfectly and looks good. I am very happy with the results.
Write a review