Product filters Product filters

CB Antenna Accessories

Your CB antenna is the most important component in your CB radio installation. We have a huge selection of CB antenna accessories to help you get your antenna installed, tuned, and ready to handle the elements. When it comes to mounts, no one has more options than CB World! Many of the options don't even require drilling or otherwise modifying your vehicle.

If you are just looking for the essentials, you will need a mount, coax, and an SWR meter for your antenna. It is important to remember to make sure your coax has the right connectors for your mount. Most of our antennas and accessories are threaded either 3/8" x 24 or NMO. It should be clear from the picture and/or description which they are. If you have any doubts or questions, please let us know! And always remember to tune your CB antenna!  If you don't have an SWR meter, we carry several brands.

We also have all the optional components you may need, including springs, quick disconnects, and replacement parts like ferrules, whips, and set screws.  If you would like more advice, please see our guide to choosing the best CB antenna for your specific needs.

$32.54
Fender Mount

The MKJ4R from Firestik is a hood/fender antenna mount kit that includes a mount and coax for CB and other antennas.  It is compatible with 1997 to 2006 Jeep Wranglers

In stock
+
Add to wish list

$12.59

This optional spring will help protect your antenna from overhead branches and other obstructions.  When an antenna strikes objects the spring absorbs the shock, allowing the antenna to flex and get under it without breaking.

In stock
+
Add to wish list

$20.99

This is a versitle mount designed for mouting in vehicle door jambs.  It will also mount in hood channels, hatchbacks, and other locations.  Constructed from durable stainless steel.  Made in the USA.

In stock

$26.24

FireStik’s exclusive 2-piece “EZ-install” CB coax is sturdier, more weather resistant, and easier to install than traditional cable. The removable PL259 makes routing the cable a snap and the Firestik FireRing connector makes attaching the cable to your mount easy as well!

In stock

$18.89

The SS294A “over rail” Stake Hole mount from FireStik® will fit most pickup trucks. It allows an easy mounting solution for adding a CB antenna in the Stake Hole pockets along the bed of your truck, running the cable out of the bottom of the pocket.

In stock
+
Add to wish list

$16.79

High quality coaxial cable from Firestik uses their unique FireRing connector to attach to most CB antenna mounts including all Firestik brand CB antenna mounts. The FireRing connector eliminates the need for a separate ground wire as the connector grounds to the mount when correctly attached. Fire-Flex coax is available in both 9 and 18 foot length as processed or unprocessed cables to suit any CB, Amateur radio, or Scanner antenna installation need.


$17.84

The K1-A quick disconnect from Firestik has an internal locking mechanism that is protected from weather and damage. The secure operation of the K1-A allows you to quickly detach your CB antenna when you enter a parking structure, driving under trees, entering a car wash, or if you want to prevent the theft of your finely tuned mobile radio antenna.

In stock
+
Add to wish list

$15.21
3 Way Mount

Firestik 3 way mounts are a great solution for mirror brackets, flat vertical surfaces, horizontal or vertical tubing, rails, and more.  Available in stainless steel or plated.

In stock

$11.54

The FireStik SS3M optional CB antenna spring will help protect your antenna from overhead branches and other obstructions. When an antenna strikes objects the spring absorbs the shock, allowing the antenna to flex and get under it without breaking. The SS3M medium spring is rated for 2 - 3 foot antennas.

In stock
+
Add to wish list

$19.94

This CB coax and antenna stud kit will allow any 3/8" x 24 threaded antenna to be mounted to any flat surface with a 1/2 inch hole in it.  The cable is available in 9 and 18 foot lengths. 

In stock

$28.34

The MK294R mini-kit from the FireStik Antenna Company includes 18 feet of high quality coax and a stake hole mount. The mount installs in the stake hole pockets on the bed of a pickup with the coax attaching to the top of the mount. A simple, rugged, convenient method of attaching a two-way radio or scanner antenna to your pickup truck.

In stock
+
Add to wish list

$19.41
Stake Hole Mount

The FireStik Antenna Company strikes again. The stainless steel extended stake hole mount for pick-up beds takes advantage of the pick-up bed design for a no hole drilling required CB radio antenna install. Stout enough for the tallest two-way radio antenna and available with a choice of plug or lug antenna mount stud. The perfect solution for a pick-up with a canopy or camper shell.

In stock

$7.86

Antenna studs are the most critical component of any two-way radio transceiver to antenna link. The high quality stud mounts produced by the Firestik Antenna Company have been the industry standard for many years. Don’t let an inferior aluminum antenna stud result in signal loss for your transceiver use the best, ask for a genuine FireStik antenna stud.

In stock

$16.79

The FireStik SSJ4 fender mount was designed specifically for Jeep Wranglers. The SSJ4 mount is constructed from stainless steel and will require drilling holes to install. It mounts on the driver side or passenger side of the vehicle. The SSJ4 antenna mount will securely hold antennas up to four feet tall and requires coax cable with ring connectors to complete the installation.

In stock
+
Add to wish list

$36.74
Side Mount

This side mount CB antenna kit is perfect for vehicle or RV installations.  The coax attaches on the inside of the mounting surface, making it easier to route.

In stock
+
Add to wish list

$12.59

This molded side mount will hold antennas up to 3 feet long (or 4 feet for lighter antennas)  The design of this mount allows the coax to attach inside the mounting surface, making it eaiser to run coax in a vehicle. 

In stock
+
Add to wish list

$18.89

FireStik Fire-Flex RG58A/U coaxial cable provides the perfect blend of flexibility and high quality for single antenna radio installations. FireStik K8 cables are available with your choice of PL259 or Lug connector to suit your specific antenna mounting solution. Be sure to use only the highest quality 50 Ohm coax cables for mobile two-way radios.

In stock

$35.69
    Good arteries are important to your heart like good coax cable is important to your radio. FireStik single lead cable assemblies are made...
In stock
+
Add to wish list

$37.79

The FireStik Antenna Company strikes again with the K11 antenna magnet mount. The strongest, most rugged mag mount available for today’s CB and Amateur radios. A complete antenna mounting solution that is ready to install right out of the box for hassle free long service life. Firestik includes a full 18 feet of their Fire-Flex coax with antenna stud and Fire-Ring connector. FireStik still made in America with the quality and workmanship that you demand.

In stock
+
Add to wish list

$8.39

The Stud mount for your CB radio antenna may be the most critical, yet underrated component in your two-way radio installation. Why take the chance of losing your antenna mast due to excess vibration? Worse yet live day in and out with unnecessary signal loss, chalking poor performance up to the limits of 11 meter radio. Install a FireStik K4R antenna mount stud with your FireStik antenna and FireStik FireRing coax and experience the quality and craftsmanship for yourself today!

In stock
+
Add to wish list

$17.84

A CB antenna mount with universal appeal – the “widget” from FireStik Antenna Company. Twist and adjust the widget for up to 90 degrees of angel to match the slope of your bumper, trunk lid, or hatchback for the best antenna clearance and tuning possible. The swivel CB antenna mount from FireStik is a creative mount that installs on the edge of any flat surface.

In stock

$12.59

Firestik CB antenna spring mounts reduce the overall height of the stud and spring by combining the two into on piece. Available with medium and heavy springs and terminal or screw on coax connections.

In stock

$45.14

The MU9R18 dual CB antenna coax from Firestik makes installing a dual CB antenna system a snap. The three piece cable separates with mini UHF connectors for easy cable routing. No coax processing, no Soldering required to achieve a professional install. FireStik’s exclusive FireRing connectors terminate flat at the antenna stud for a true low profile antenna mount. Innovative, quality CB antennas and accessories for over 50 years from the FireStik® Antenna Company.

In stock
+
Add to wish list

$34.99

The FireStik MK204R kit includes 18 feet of CB coax and a versatile mount that adjusts to fit in a variety of locations on your vehicle. The all stainless steel antenna mount was designed for door jambs, but it also works as a fender, hatchback, or side mount. The FireStik door jamb mount extends and adjusts allowing for a huge variety of angles for antenna installations.

In stock
+
Add to wish list