Product filters Product filters

CB Antenna Accessories

Your CB antenna is the most important component in your CB radio installation. We have a huge selection of CB antenna accessories to help you get your antenna installed, tuned, and ready to handle the elements. When it comes to mounts, no one has more options than CB World! Many of the options don't even require drilling or otherwise modifying your vehicle.

If you are just looking for the essentials, you will need a mount, coax, and an SWR meter for your antenna. It is important to remember to make sure your coax has the right connectors for your mount. Most of our antennas and accessories are threaded either 3/8" x 24 or NMO. It should be clear from the picture and/or description which they are. If you have any doubts or questions, please let us know! And always remember to tune your CB antenna!  If you don't have an SWR meter, we carry several brands.

We also have all the optional components you may need, including springs, quick disconnects, and replacement parts like ferrules, whips, and set screws.  If you would like more advice, please see our guide to choosing the best CB antenna for your specific needs.

$15.74

The CBLS009 is FireStik’s replacement Y connector for MU9R18 dual antenna cable harness. Essential part for plug n’ play connection of dual CB antennas the radio unit

In stock
+
Add to wish list

$19.94

This CB coax and antenna stud kit will allow any 3/8" x 24 threaded antenna to be mounted to any flat surface with a 1/2 inch hole in it.  The cable is available in 9 and 18 foot lengths. 

In stock

$10.49

FireStik’s K145A cowl mount low profile design allows you to mount your mobile antenna where you want it. The K4A stud rapidly connects any PL259 terminated coax to your radio and antenna for a standardized mobile solution that is clean looking and FIreStik strong.

In stock
+
Add to wish list

$2.09
Factory replacement tips for Firestik CB Antennas
In stock

$36.74
Side Mount

This side mount CB antenna kit is perfect for vehicle or RV installations.  The coax attaches on the inside of the mounting surface, making it easier to route.

In stock
+
Add to wish list

$2.99

FireStik RT-1 terminals are matched for proper amperage rating of RG58/59 high performance coaxial cable. Whether you are performing an upgrade or necessary repair to your coax system, using the right connector correctly is key to optimizing your radio’s performance. Demand genuine FireStik Antenna Company components when only the very best will do.

In stock
+
Add to wish list

$32.54
Fender Mount

The MKJ4R from Firestik is a hood/fender antenna mount kit that includes a mount and coax for CB and other antennas.  It is compatible with 1997 to 2006 Jeep Wranglers

In stock
+
Add to wish list

$36.74

An adjustable stainless steel CB antenna mount that allows you infinite possibilities. The FireStik MK274R is designed to be the ideal choice for automotive hood, trunk, or hatchback antenna placement. The MK274R is actually a complete mounting kit that mates the SS-274 channel mount with FireStik’s professional quality Fire-Flex coaxial cable that features the Fire-ring connector.

In stock
+
Add to wish list

$34.99

The FireStik MK204R kit includes 18 feet of CB coax and a versatile mount that adjusts to fit in a variety of locations on your vehicle. The all stainless steel antenna mount was designed for door jambs, but it also works as a fender, hatchback, or side mount. The FireStik door jamb mount extends and adjusts allowing for a huge variety of angles for antenna installations.

In stock
+
Add to wish list

$18.89

The SS294A “over rail” Stake Hole mount from FireStik® will fit most pickup trucks. It allows an easy mounting solution for adding a CB antenna in the Stake Hole pockets along the bed of your truck, running the cable out of the bottom of the pocket.

In stock
+
Add to wish list

$45.14

The MU9R18 dual CB antenna coax from Firestik makes installing a dual CB antenna system a snap. The three piece cable separates with mini UHF connectors for easy cable routing. No coax processing, no Soldering required to achieve a professional install. FireStik’s exclusive FireRing connectors terminate flat at the antenna stud for a true low profile antenna mount. Innovative, quality CB antennas and accessories for over 50 years from the FireStik® Antenna Company.

In stock
+
Add to wish list

$28.34

The MK294R mini-kit from the FireStik Antenna Company includes 18 feet of high quality coax and a stake hole mount. The mount installs in the stake hole pockets on the bed of a pickup with the coax attaching to the top of the mount. A simple, rugged, convenient method of attaching a two-way radio or scanner antenna to your pickup truck.

In stock
+
Add to wish list

$27.29

FireStik quality dome mount and Fire-flex coax combined in a complete ready to install mini-kit. Designed for low profile flat surfacing mounting of CB and similar radio antenna with FireStik professional grade precision.

In stock
+
Add to wish list

$37.79

The FireStik Antenna Company strikes again with the K11 antenna magnet mount. The strongest, most rugged mag mount available for today’s CB and Amateur radios. A complete antenna mounting solution that is ready to install right out of the box for hassle free long service life. Firestik includes a full 18 feet of their Fire-Flex coax with antenna stud and Fire-Ring connector. FireStik still made in America with the quality and workmanship that you demand.

In stock
+
Add to wish list

$17.84

FireStik’s SSJ4A SO239 Stud equipped Jeep Fender antenna mount will support the beefiest 4 foot CB and Amateur radio antennas. Enjoy go anywhere driving while keeping in contact. The SSJ4A aptly hides all mounting hardware from sight in a weather resistant all stainless steel package that will last even through the toughest seasons.

In stock
+
Add to wish list

$31.76

Firestik Antenna Company is well known for their high quality antennas and mounting solutions. Their all stainless steel mounts are durable and built to last. The SS-174 is the perfect CB antenna mount for newer Ford and Chevy trucks as well as many other vehicles with hood and trunk channels up to 2 inches deep.

In stock

$15.21
3 Way Mount

Firestik 3 way mounts are a great solution for mirror brackets, flat vertical surfaces, horizontal or vertical tubing, rails, and more.  Available in stainless steel or plated.

In stock

$19.41
Stake Hole Mount

The FireStik Antenna Company strikes again. The stainless steel extended stake hole mount for pick-up beds takes advantage of the pick-up bed design for a no hole drilling required CB radio antenna install. Stout enough for the tallest two-way radio antenna and available with a choice of plug or lug antenna mount stud. The perfect solution for a pick-up with a canopy or camper shell.

In stock

$12.59

Firestik CB antenna spring mounts reduce the overall height of the stud and spring by combining the two into on piece. Available with medium and heavy springs and terminal or screw on coax connections.

In stock

$16.79
Flat Mount

This flat CB antenna mount can be attached to any flat surface on your vehicle by drilling a few holes and using the included hardware to bolt the mount on.

In stock

$17.84

A CB antenna mount with universal appeal – the “widget” from FireStik Antenna Company. Twist and adjust the widget for up to 90 degrees of angel to match the slope of your bumper, trunk lid, or hatchback for the best antenna clearance and tuning possible. The swivel CB antenna mount from FireStik is a creative mount that installs on the edge of any flat surface.

In stock

$26.24

FireStik’s exclusive 2-piece “EZ-install” CB coax is sturdier, more weather resistant, and easier to install than traditional cable. The removable PL259 makes routing the cable a snap and the Firestik FireRing connector makes attaching the cable to your mount easy as well!

In stock

$27.29

All in one antenna kit for Dodge trucks, the FireStik MK184R provides quality and convenience for Ram, Dakota, and Durango owners. A hood channel mount, FireFlex coax, and Firestik antenna stud designed to fit 1994-2004 Dodges. Especially for do it yourself installers who do not want to drill into their truck body, Firestik mounts are great looking, secure, and rugged.

In stock
+
Add to wish list

$24.69

A low profile secure mounting solution for CB and Amateur radio antennas that will keep your 3 foot tall antenna held tight without requiring the drilling of holes. The MK748R FireStik trunk lip mount kit Clamps securely to the trunk edge on most sedan style vehicles. Matching Fire-Flex coaxial cable and FireStik® antenna stud makes a complete ready to mount solution. Available without Fire-Flex coax as the K74 trunk lip antenna mount. Have it your way today from CB World your number 1 supplier of CB radios, antennas, and accessories on the net!

In stock

$13.64
Flat Mount

If you are looking to mount a CB or ham radio antenna to a flat surface but lack a tough, quality made mounting bracket to make it happen CB World has the answer. The SS124 all stainless universal flat antenna mount from the FireStik Antenna Company. The possibilities are almost unlimited for the SS124. If you can visualize a way to attach the flat antenna mount, it will hold your antenna without fail. Choose the SS124 for stud to lug connection and the SS124-A for stud to screw on connections.

In stock

$17.84

The K1-A quick disconnect from Firestik has an internal locking mechanism that is protected from weather and damage. The secure operation of the K1-A allows you to quickly detach your CB antenna when you enter a parking structure, driving under trees, entering a car wash, or if you want to prevent the theft of your finely tuned mobile radio antenna.

In stock
+
Add to wish list

$16.79
Flat Mount

The FireStik SS134 is a CB antenna mount that is specifically designed for use on flat mirror support brackets or flat vertical surfaces. The SS134 is available with a choice of PL259 or lug stud coax connector. The Clamp-on antenna mount from the FireStik Antenna Company is constructed from Stainless steel to long lasting service with you CB or ham antenna.

In stock

$2.40

Hang your two-way radio mic where it is both easy to see and reach. No drilling required to mount the FireStik MH20 microphone hanger. Just a simple all stainless steel hanger that’s flexible yet strong.

In stock
+
Add to wish list

$20.99

You demand a lot from your equipment. Adjustable, adaptable to you. That’s what you want from your vehicles accessories – especially your CB or Ham radio! The FireStik Antenna Company offers its versatile Hood/Trunk/Hatch channel mounts with 180 degrees of possible angels for mounting. The SS-274 family of CB antenna mounts as adjustable as you need them to be!

In stock

$13.64

Fender mount for Doge pickups 1994-2003.  This stainless steel mount is available with a K4 or K4A stud.  It will hold CB antennas up to 5 feet in length. 

In stock

$20.99

This is a versitle mount designed for mouting in vehicle door jambs.  It will also mount in hood channels, hatchbacks, and other locations.  Constructed from durable stainless steel.  Made in the USA.

In stock

$16.79

The FireStik SSJ4 fender mount was designed specifically for Jeep Wranglers. The SSJ4 mount is constructed from stainless steel and will require drilling holes to install. It mounts on the driver side or passenger side of the vehicle. The SSJ4 antenna mount will securely hold antennas up to four feet tall and requires coax cable with ring connectors to complete the installation.

In stock
+
Add to wish list

$13.64

The FireStik “Widget” is a multi-angle, Swiss army knife two-way radio antenna mount. The mounting stud attaches directly to a chrome plated swivel bracket allowing the antenna angle to be adjusted perpendicular to the mounting plane. This allows the antenna angle to be corrected vertically with the mount on the left or right edge of a trunk, hatchback or bumper. Hardware and mounting stud are included with the WTP4 Tilt plate antenna mount.

In stock

$12.59

This molded side mount will hold antennas up to 3 feet long (or 4 feet for lighter antennas)  The design of this mount allows the coax to attach inside the mounting surface, making it eaiser to run coax in a vehicle. 

In stock
+
Add to wish list

$2.50

Protect your coax from damage. CGA coax grommets from the FireStik Antenna Company are the ingenious invention we all wish we would have thought of. Simple to apply, protection for coax cable damage due to contact with sharp bearing surfaces and similar hazards. Sometimes the best solutions are the simple ones. CGA grommets, just simple, effective cable protection.

In stock
+
Add to wish list

$12.59

This optional spring will help protect your antenna from overhead branches and other obstructions.  When an antenna strikes objects the spring absorbs the shock, allowing the antenna to flex and get under it without breaking.

In stock
+
Add to wish list

$8.39
Nylon washers such as these are used to isolate the shield from the center conductor in CB antenna instillations. Nylon washers are a must for a dependable...
In stock
+
Add to wish list

$8.39

Protecting your vehicle, CB antenna, and mount is easy. Install a FireStik antenna medium spring for maximum protection of shorter fiberglass antennas. One whack from a low lying obstacle and you’ll fully appreciate the quality of an all stainless steel Firestik antenna spring.

In stock
+
Add to wish list

$2.63
Replacement tip parts for Firestik II and Firefly tuneable tip CB antennas.
In stock

$22.04

A no slip dome mirror mount the FireStik DM164A provides heavy duty CB antenna mounting capability for mirrors, racks, and rails.

Out-of-stock Add to wish list

$11.54
Side Mount

Firestik side mounts are versitle tools for installing a CB antenna on any flat vertical surface. Available in stainless and plated steel, this is a mount that works for a great many installations.

In stock

$18.89

FireStik Fire-Flex RG58A/U coaxial cable provides the perfect blend of flexibility and high quality for single antenna radio installations. FireStik K8 cables are available with your choice of PL259 or Lug connector to suit your specific antenna mounting solution. Be sure to use only the highest quality 50 Ohm coax cables for mobile two-way radios.

In stock

$12.59
Roof Mount

The FireStik stainless steel CB antenna mount is great for roof mounting and other flat horizontal applications. It offers a low profile look that won't stand out too much. A rubber gasket protects the vehicles finish and provides weather proofing.

In stock

$16.79

High quality coaxial cable from Firestik uses their unique FireRing connector to attach to most CB antenna mounts including all Firestik brand CB antenna mounts. The FireRing connector eliminates the need for a separate ground wire as the connector grounds to the mount when correctly attached. Fire-Flex coax is available in both 9 and 18 foot length as processed or unprocessed cables to suit any CB, Amateur radio, or Scanner antenna installation need.

In stock

$2.40

The idea we all wish had thought of – Hole plugs. FireStik offers a neat way to cover unused antenna cable holes with the hole plug. These snap in hole fillers are available 4 to a package with two different sizes included in the small or large size plug pack. While not waterproof these hole plugs will fill the void and are easy to install in almost any hole.

In stock

$11.54

The FireStik SS3M optional CB antenna spring will help protect your antenna from overhead branches and other obstructions. When an antenna strikes objects the spring absorbs the shock, allowing the antenna to flex and get under it without breaking. The SS3M medium spring is rated for 2 - 3 foot antennas.

In stock
+
Add to wish list

$8.39

Do you need to protect your CB antenna threads from moisture or damage? Perhaps you’ve removed your antenna so you can get through the car wash or fit into a low clearance garage. The FireStik PLG1 Standard thread protector plug has you covered. Just thread into your 3/8 x 24 mount or accessory and rest assured your threads are covered.

In stock
+
Add to wish list

$8.39

The Stud mount for your CB radio antenna may be the most critical, yet underrated component in your two-way radio installation. Why take the chance of losing your antenna mast due to excess vibration? Worse yet live day in and out with unnecessary signal loss, chalking poor performance up to the limits of 11 meter radio. Install a FireStik K4R antenna mount stud with your FireStik antenna and FireStik FireRing coax and experience the quality and craftsmanship for yourself today!

In stock
+
Add to wish list

$17.84

A durable CB antenna mount with dual connection options the DM4 Dome mount from Firestik can withstand the elements with style to spare.

In stock

$13.64

R36A 3-Foot Mini-8 RG-8X Plug-to-Plug Jumper short CB coax is a great accessory cable for connecting SWR meters, power meters, and other devices in line between the CB radio and CB antenna.

In stock
+
Add to wish list

$7.86

Antenna studs are the most critical component of any two-way radio transceiver to antenna link. The high quality stud mounts produced by the Firestik Antenna Company have been the industry standard for many years. Don’t let an inferior aluminum antenna stud result in signal loss for your transceiver use the best, ask for a genuine FireStik antenna stud.

In stock

$35.69
    Good arteries are important to your heart like good coax cable is important to your radio. FireStik single lead cable assemblies are made...
In stock
+
Add to wish list

$41.89

High grade FireStik Fire-Flex® co-phased coaxial cable for dual antenna setups! You chose the connector style to suit your antenna mount – ring/spade terminals or PL-259 connectors. Suitable for use with the FireStik Antenna Company K4 or K4-A stud mounts, your CB will rock the air waves with superior modulation!

In stock