Product filters Product filters

CB Antenna Accessories

Your CB antenna is the most important component in your CB radio installation. We have a huge selection of CB antenna accessories to help you get your antenna installed, tuned, and ready to handle the elements. When it comes to mounts, no one has more options than CB World! Many of the options don't even require drilling or otherwise modifying your vehicle.

If you are just looking for the essentials, you will need a mount, coax, and an SWR meter for your antenna. It is important to remember to make sure your coax has the right connectors for your mount. Most of our antennas and accessories are threaded either 3/8" x 24 or NMO. It should be clear from the picture and/or description which they are. If you have any doubts or questions, please let us know! And always remember to tune your CB antenna!  If you don't have an SWR meter, we carry several brands.

We also have all the optional components you may need, including springs, quick disconnects, and replacement parts like ferrules, whips, and set screws.  If you would like more advice, please see our guide to choosing the best CB antenna for your specific needs.

$2.09
Factory replacement tips for Firestik CB Antennas
In stock

$2.40

Hang your two-way radio mic where it is both easy to see and reach. No drilling required to mount the FireStik MH20 microphone hanger. Just a simple all stainless steel hanger that’s flexible yet strong.

In stock
+
Add to wish list

$2.40

The idea we all wish had thought of – Hole plugs. FireStik offers a neat way to cover unused antenna cable holes with the hole plug. These snap in hole fillers are available 4 to a package with two different sizes included in the small or large size plug pack. While not waterproof these hole plugs will fill the void and are easy to install in almost any hole.

In stock

$2.50

Protect your coax from damage. CGA coax grommets from the FireStik Antenna Company are the ingenious invention we all wish we would have thought of. Simple to apply, protection for coax cable damage due to contact with sharp bearing surfaces and similar hazards. Sometimes the best solutions are the simple ones. CGA grommets, just simple, effective cable protection.

In stock
+
Add to wish list

$2.63
Replacement tip parts for Firestik II and Firefly tuneable tip CB antennas.
In stock

$2.99

FireStik RT-1 terminals are matched for proper amperage rating of RG58/59 high performance coaxial cable. Whether you are performing an upgrade or necessary repair to your coax system, using the right connector correctly is key to optimizing your radio’s performance. Demand genuine FireStik Antenna Company components when only the very best will do.

In stock
+
Add to wish list

$7.86

Antenna studs are the most critical component of any two-way radio transceiver to antenna link. The high quality stud mounts produced by the Firestik Antenna Company have been the industry standard for many years. Don’t let an inferior aluminum antenna stud result in signal loss for your transceiver use the best, ask for a genuine FireStik antenna stud.

In stock

$8.39
Nylon washers such as these are used to isolate the shield from the center conductor in CB antenna instillations. Nylon washers are a must for a dependable...
In stock
+
Add to wish list

$8.39

Do you need to protect your CB antenna threads from moisture or damage? Perhaps you’ve removed your antenna so you can get through the car wash or fit into a low clearance garage. The FireStik PLG1 Standard thread protector plug has you covered. Just thread into your 3/8 x 24 mount or accessory and rest assured your threads are covered.

In stock
+
Add to wish list

$8.39

The Stud mount for your CB radio antenna may be the most critical, yet underrated component in your two-way radio installation. Why take the chance of losing your antenna mast due to excess vibration? Worse yet live day in and out with unnecessary signal loss, chalking poor performance up to the limits of 11 meter radio. Install a FireStik K4R antenna mount stud with your FireStik antenna and FireStik FireRing coax and experience the quality and craftsmanship for yourself today!

In stock
+
Add to wish list

$8.39

Protecting your vehicle, CB antenna, and mount is easy. Install a FireStik antenna medium spring for maximum protection of shorter fiberglass antennas. One whack from a low lying obstacle and you’ll fully appreciate the quality of an all stainless steel Firestik antenna spring.

In stock
+
Add to wish list

$10.49

FireStik’s K145A cowl mount low profile design allows you to mount your mobile antenna where you want it. The K4A stud rapidly connects any PL259 terminated coax to your radio and antenna for a standardized mobile solution that is clean looking and FIreStik strong.

In stock
+
Add to wish list