Product filters Product filters

CB Antenna Accessories

Your CB antenna is the most important component in your CB radio installation. We have a huge selection of CB antenna accessories to help you get your antenna installed, tuned, and ready to handle the elements. When it comes to mounts, no one has more options than CB World! Many of the options don't even require drilling or otherwise modifying your vehicle.

If you are just looking for the essentials, you will need a mount, coax, and an SWR meter for your antenna. It is important to remember to make sure your coax has the right connectors for your mount. Most of our antennas and accessories are threaded either 3/8" x 24 or NMO. It should be clear from the picture and/or description which they are. If you have any doubts or questions, please let us know! And always remember to tune your CB antenna!  If you don't have an SWR meter, we carry several brands.

We also have all the optional components you may need, including springs, quick disconnects, and replacement parts like ferrules, whips, and set screws.  If you would like more advice, please see our guide to choosing the best CB antenna for your specific needs.

$2.09
Factory replacement tips for Firestik CB Antennas
In stock

$15.74

The CBLS009 is FireStik’s replacement Y connector for MU9R18 dual antenna cable harness. Essential part for plug n’ play connection of dual CB antennas the radio unit

In stock
+
Add to wish list

$13.64

The FireStik “Widget” is a multi-angle, Swiss army knife two-way radio antenna mount. The mounting stud attaches directly to a chrome plated swivel bracket allowing the antenna angle to be adjusted perpendicular to the mounting plane. This allows the antenna angle to be corrected vertically with the mount on the left or right edge of a trunk, hatchback or bumper. Hardware and mounting stud are included with the WTP4 Tilt plate antenna mount.

In stock

$2.63
Replacement tip parts for Firestik II and Firefly tuneable tip CB antennas.
In stock

$17.84

A CB antenna mount with universal appeal – the “widget” from FireStik Antenna Company. Twist and adjust the widget for up to 90 degrees of angel to match the slope of your bumper, trunk lid, or hatchback for the best antenna clearance and tuning possible. The swivel CB antenna mount from FireStik is a creative mount that installs on the edge of any flat surface.

In stock

$12.59
Roof Mount

The FireStik stainless steel CB antenna mount is great for roof mounting and other flat horizontal applications. It offers a low profile look that won't stand out too much. A rubber gasket protects the vehicles finish and provides weather proofing.

In stock

$16.79

The FireStik SSJ4 fender mount was designed specifically for Jeep Wranglers. The SSJ4 mount is constructed from stainless steel and will require drilling holes to install. It mounts on the driver side or passenger side of the vehicle. The SSJ4 antenna mount will securely hold antennas up to four feet tall and requires coax cable with ring connectors to complete the installation.

In stock
+
Add to wish list

$16.79
Flat Mount

This flat CB antenna mount can be attached to any flat surface on your vehicle by drilling a few holes and using the included hardware to bolt the mount on.

In stock

$11.54

The FireStik SS3M optional CB antenna spring will help protect your antenna from overhead branches and other obstructions. When an antenna strikes objects the spring absorbs the shock, allowing the antenna to flex and get under it without breaking. The SS3M medium spring is rated for 2 - 3 foot antennas.

In stock
+
Add to wish list

$12.59

This optional spring will help protect your antenna from overhead branches and other obstructions.  When an antenna strikes objects the spring absorbs the shock, allowing the antenna to flex and get under it without breaking.

In stock
+
Add to wish list

$20.99

This is a versitle mount designed for mouting in vehicle door jambs.  It will also mount in hood channels, hatchbacks, and other locations.  Constructed from durable stainless steel.  Made in the USA.

In stock

$19.41
Stake Hole Mount

The FireStik Antenna Company strikes again. The stainless steel extended stake hole mount for pick-up beds takes advantage of the pick-up bed design for a no hole drilling required CB radio antenna install. Stout enough for the tallest two-way radio antenna and available with a choice of plug or lug antenna mount stud. The perfect solution for a pick-up with a canopy or camper shell.

In stock