Product filters Product filters

CB Antenna Accessories

Your CB antenna is the most important component in your CB radio installation. We have a huge selection of CB antenna accessories to help you get your antenna installed, tuned, and ready to handle the elements. When it comes to mounts, no one has more options than CB World! Many of the options don't even require drilling or otherwise modifying your vehicle.

If you are just looking for the essentials, you will need a mount, coax, and an SWR meter for your antenna. It is important to remember to make sure your coax has the right connectors for your mount. Most of our antennas and accessories are threaded either 3/8" x 24 or NMO. It should be clear from the picture and/or description which they are. If you have any doubts or questions, please let us know! And always remember to tune your CB antenna!  If you don't have an SWR meter, we carry several brands.

We also have all the optional components you may need, including springs, quick disconnects, and replacement parts like ferrules, whips, and set screws.  If you would like more advice, please see our guide to choosing the best CB antenna for your specific needs.

$17.99 $15.00

Replacement Meter for C29LTDBT and C29LTDSEC

In stock
+
Add to wish list

$7.06

CRIMP ON PL259 CONNECTOR FOR RG58 COAX (BULK)

In stock
+
Add to wish list

$4.99
Procomm 3' Coax Cable with PL259 Connectors
In stock
+
Add to wish list

$4.42

Amphenol Quick On PL259 for RG58

In stock
+
Add to wish list

$9.99 $5.99

Antenna specilaist rubber hole plug for 1 5/16 inch sizes. Great accessory for cover unuused CB antenna mount holes in auto body!

In stock
+
Add to wish list

$59.90 $53.89
If you’re Wilson magnetic mount CB antenna has lost its grip on your vehicle, this genuine Wilson replacement part will get your radio transmitting like...
In stock
+
Add to wish list

$29.95

Adjustable mirror CB antenna mount for Cascadia Freight liner big rigs! The PCA5002 is a rugged and sturdy mount that includes an SO239 antenna stud, ready for you next road trip!

In stock
+
Add to wish list

$63.99
If you want to step up from a basic SWR meter, consider the PDC5 SWR/Wattage test meter with built in antenna matcher from Astatic. A 3 function meter that...
Out-of-stock Add to wish list

$9.99

Accessories Unlimited Small flat mounting plate with stud for attaching CB, scanner, and amateurr radio antennas to tool boxes and similiar surfaces.

In stock
+
Add to wish list

$19.95 $18.17

Accessories Unlimited AUCB39 Large vise grip with a SO239 stud mount for rapid deployment of CB and Ham radio antennas all most anywhere!

In stock
+
Add to wish list

$49.95 $39.49

ALUMINUM TAIL LIGHT ANTENNA MOUNT, DUAL 1/2" HOLES 18' COAX & SO239 STUD FITS 1998 TO 2006 JEEPS

In stock
+
Add to wish list

$12.99

Firestik heavy duty antenna springs coiled springs are chrome plated with standard 3/8x24 threads

In stock
+
Add to wish list

$10.99

Firestik R3M medium duty antenna spring in a plated chrome for long life and rugged use.

In stock
+
Add to wish list

$16.95

Premium grade mini-8 coax cable for your ultimate mobile radio installation from Kalibur!

In stock
+
Add to wish list

$4.49

coax connector for Procomm coax cable assembly

In stock
+
Add to wish list

$5.86

High quality RG8X Mini-8 coax cable offers outstanding performance for CB or 10 meter radios. Flexible yet strong Mini-8 is often the cable of choice for routing inside vehicle chassis and cabs. Kalibur offers quality processed RG8X coaxial cables complete with 100% tested, hand soldered dual PL259 connectors for convenience. You know that your coax will offer low loss, low noise with your CB radio installation – the coax will be one less problem to worry about when using high quality RG8X cable.

In stock

$4.90

Adding a circuit to your vehicles electrical system is easy and safe with a fuse tapper. Add accessories up to 10 amps with a dual in line fused circuit for APS, ATM, or ATC/ATO fuses. Install CB, 10 meter radios, radio detectors, and more. Safely connect accessories to your vehicles fuse panel with minimal tools and protect your valuable electronics with its own fused power connections. Add-A-Circuit requires accessory fuse that is not included.

In stock

$23.99 $17.84
Flat Mount
This "unbreakable" stud goes above and beyond for most applications.  The solid steel construction is threaded for 3/8" x 24 threaded antennas and a PL259 coax connection.
In stock
+
Add to wish list

$61.99

The FJ Cruiser Bandi Mount Kit, a complete CB antenna kit that includes an 18 foot coax with removable PL259 for easy install, antenna stud, and a custom Bandi Mount exclusively for FJ Cruisers. In fact the Bandi mount matches the FJ cruiser so well, it’s hard to tell that this is not a from the factory accessory!

Get yours today with free shipping and easy returns at CB World!

In stock

$29.95 $26.24

Keep it simple. The ability to combine your CB and AM/FM antennas with the IM-AF AM/FM antenna splitter from ProComm can declutter you’re in cab radio equipment. Just think one high quality CB antenna can take of your one-way and two-way radio needs. Pull in standard AM/FM radio signals over your ground plane CB radio antenna!

In stock
+
Add to wish list

$10.50

A Nickel plated brass heavy duty CB antenna stud that will last for years. No need to worry about corrosion or inferior construction failing to hold your radio antenna. Simple, rugged, peace of mind that gives great antenna to mount and coax connection. Get a Heavy duty stud for you next mount.

In stock
+
Add to wish list

$77.95 $59.49

This mount was designed specifically to fit the spare tire rack for Jeeps.  The coax has a removeable PL259 connector for easy cable routing.  Uses existing bolts on the Jeep.  No drilling required!

In stock

$16.79

Professional quality adapter for Dual antenna two-way radio installations, this 12 inch Y-cable provides PL259 to Dual Male BNC plug-in capability that is just the right length to complete your antenna connection.

In stock
+
Add to wish list

$31.49

Imagine the possibilities to mount your CB antenna wherever you want with the 3 way CB antenna mount kit from ProComm. A complete kit with high quality ProComm weatherproof coax furnished with a removable PL259 and heavy duty antenna stud. This 3 way mount is ideal for all vertical or horizontal mounting applications. Just imagine.

In stock
+
Add to wish list

$15.74

Grounding radials for the Shakespeare 318-GBT Pogo stick antenna. Now there is no need to try and fabricate these important grounding planes. Order your OEM factory replacement radial kit for the 318-GBT from CB World today!

In stock
+
Add to wish list

$15.74
This dual purpose power and SWR meter is an essential tool for installing your CB radio system.  Tuning your CB antenna with a good SWR meter will...
In stock
+
Add to wish list

$15.99

High quality RG8X coax in 6 foot length that excellent for jumper and mobile applications. With 2 PL259 connectors it’s easy to use right out of the box.

In stock
+
Add to wish list

$19.99 $10.49
Requires 1/2" hole and will accept standard 3/8 " X 24" antennas or springs. Other options then the roof would be tool box or any flat surface. Coax...
Out-of-stock Add to wish list

$162.74

The Dosy TC-4001-P is a multi-function test center. The TC-4001 is capable of reading SWR, modulation, and power over 4 ranges of RMS for any CB radio. A built in phone jack with full volume adjustment and a back lit meter are bonus features on the TC-4001-P. Measures AM or SSB modulation percentage. The Dosy TC-4001-P measures 9 1/2" W x 6" T x 5" D not including dials and connectors.

In stock
+
Add to wish list

$120.74
The Dosy TC-3001-P is a high-end SWR, power, and modulation meter for CB radio. It features three large, lighted meters, three power scales (10, 100 and...
Out-of-stock Add to wish list

$41.99
If you are looking for a CB antenna mount with a clean installation with no drilling holes, this is the one for you!  This mount will bolt under the...
In stock
+
Add to wish list

$20.99

Why void the warranty on your new Toyota truck? No need to drill holes to mount a CB antenna with the AUT2-L fender mount from Accessories Unlimited and CB World. The AUT2-L blends with the smooth flow of the hood on Toyota pickups and sport utility vehicles delivering function and style that holds up to the toughest stuff.

In stock
+
Add to wish list

$20.99

This fender mount was designed for newer Chevy pickups, 2010 - 2013.  It also fits some Toyota Tacoma pickups.  No drilling required on compatible pickups.  Includes CB antenna stud.

In stock
+
Add to wish list

$20.99

Ford’s number one F-series trucks deserve a CB Antenna mount that not only looks great but is as rugged as the trucks themselves. An all stainless drivers side mobile radio antenna mount the fits right and fits your Ford truck or SUV the AUF4-L will complete your radio system.

In stock
+
Add to wish list

$20.99

Mounting a two-way radio antenna on your Jeep can prove challenging. Just like most things in life it can be all about the best compromise. Now you won’t have to choose between safely securing your CB or Amateur radio antenna and achieving excellent signal strength. Accessories Unlimited AUJ1 Fender mount for 2007 and newer Jeep JK Wranglers answers the call! Keep a watchful eye on your antenna and never risk damage due to inadvertently striking a low hanging limb, garage entrance, or other “hard” medium. The fender also puts the most metal under your CB antenna for best refraction of RF signals. A true win-win with the AUJ1 and CB World!

In stock
+
Add to wish list

$20.99
This polished all stainless steel fender mount with lug stud will install with no holes drilled on 2011-2014 F350 and 2012 F250 Ford Trucks. Mounts on left...
In stock
+
Add to wish list

$19.94

The ProComm Dual CB Antenna Coax is constructed with RG59AU CO-phase cable, and screw on UHF adapters that make this cable flexible and easy to route when installing your Dual radio antennas.

In stock

$26.24

HS818TN-NIP Terminator series cable kits from ProComm. Peace of mind and ease of installation. An 18 foot cable that is the perfect length for low SWR, and reaching where you need it to go. What else matters for your CB install?

In stock
+
Add to wish list

$39.85

If you’re tired of cheaper aluminum “bird perch” style CB antenna mounts bending and twisting on your Cascadia truck while you head down the highway, replace them with the Accessories Unlimited MMCAS mounts. The MMCAS CB antenna mirror mount is a solid one piece design that is built to stand tall last. The MMCAS preserves the streamlined look and aerodynamics of your big rig, while providing secure anchors for your all-important CB radio antennas.

Accessories Unlimited providing functional performance that just looks good.

In stock

$26.24

ProComm’s Armor Flex dual shielded coax is every bit as tough as it looks. The unique exterior braid provides an extra level of interference protection not seen on most cables. A premium coaxial cable specifically designed for dual CB antenna installations. Available in 12 or 18 feet finished cable lengths and ready to install.


$8.39

Sometimes shorter is best. ProComm’s 3 foot plug to plug CB coax provides the ultimate ultra-high quality super mini 8 coax for low loss applications. 100% tested ensures that this cable will work. The perfect jumper cable for CB and Ham SWR tuning, the AF3P is perfect anytime you need a 3 foot male to male coax of the utmost quality.

In stock
+
Add to wish list

$20.99

The decision is an easy one. Use the best coax possible for your CB, 10 meter, or Ham radio. ProComm offers its high quality double braid coax complete with dual hand soldered PL259 terminators. You get hand tighten connectors, top quality American made coax that just works right! Be sure you demand ProComm AF18P the next time you need high quality coax.

In stock
+
Add to wish list

$26.24

If you’re full size car or truck has a deep groove channel chances are that the AUC11K CB antenna mounting kit will fit perfectly. The AUC11K is from Accessories Unlimited and is furnished with all stainless steel antenna mount, stud, and 18 feet of premium coax with EZ on PL-259 connector. The AUC11K is also a great solution for import vehicles where no specific mount is specified.

In stock
+
Add to wish list

$36.74

This specialized CB antenna mount installs under the tail light of many Jeep Wrangler models. The simple installation and impressive finished look of this mount make it very popular with Jeep owners. Choose from driver or passenger side mounts for a secure, reliable CB antenna mounting solution.

In stock

$56.74

A seamlessly integrated, factory look for CB antenna mounting on 2007 to 2015 Jeep Wranglers is easy with the TeraFlex tire mount from CB World. An antenna mounting solution including high quality coax with matched connectors has been expertly selected for best in class performance with your CB radio and Jeep Wrangler.

In stock

$57.90

Cruise the highways or venture off-road with added confidence when your Jeep Wrangler has a powerful CB or Ham radio ready for you. The TeraFlex CB antenna mounting kit for Jeep is designed to custom fit all Jeep CJs, LJ, YJs and TJs. A clean, professional installation is possible with the TeraFlex CB antenna mount kit. Available for driver side or passenger side the complete kit includes all hardware, coax cable, and complete instructions.

In stock

$14.28

If the tip of your base loaded half-n-half series antenna has snapped off, easily replace just the whip with the ProComm RW1400 stainless steel whip.

In stock
+
Add to wish list

$15.70
Stainless steel mouting bar for new Freightliner series Cascadia trucks.  This bar will replace a bolt in the Freightliner mirror to provide a spot to...
In stock
+
Add to wish list

$26.24

ProComm RG8X coax cable with both a Weather boot protected PL259 and removable PL259 bolsters easy installation for your radio setup.


$14.69

A short length adapter preferred by many OEM truck manufacturers the ProComm PL259 to Dual Male MUHF is a high quality cable for connections you rely on.

In stock
+
Add to wish list

$10.49
9 foot coax used for connecting antenna mounts with SO239 connectors to car stereos.  Also used in some dual antenna setups.
In stock
+
Add to wish list

$2.09

Protect the tip of your Wilson Little Wil Antenna with the black plastic tip. A protective cap for Little Wil CB antenna that looks good and is better than a poke in the eye.

In stock
+
Add to wish list

$57.74

Wilson antenna mount replacement magnet mount assembly, compatible with Wilson 1000 and 5000 whip antennas. Comes complete with PL259 connector, 17 foot cable, and weather protection cap.

In stock
+
Add to wish list

$17.90

Factory replacement whips for the popular Wilson antennas.

In stock

$24.99 $9.44

Chrome plated barrel spring offers heavy duty protection for you CB or Ham antenna, mounting bracket, and vehicle. Save yourself the hassle of replacing a damaged antenna or worse with a chromed barrel spring.

In stock
+
Add to wish list

$15.74

The CBLS009 is FireStik’s replacement Y connector for MU9R18 dual antenna cable harness. Essential part for plug n’ play connection of dual CB antennas the radio unit

In stock
+
Add to wish list

$10.49
Chrome rain cap protects NMO (1-1/8”-18 threaded) antenna mounts from weather while no antenna is mounted.This rain cap screws down on top of the mount...
In stock
+
Add to wish list

$9.44

The 180 degree adjustable CB antenna swivel is the answer for anyone with a mount that leaves your antenna at an angle of up to 45 degrees. Install the adjustable swivel and change the angle on your antenna mast quickly to match the mounting location. No more antenna tilt, just straight transmissions that come in loud and clear.

In stock
+
Add to wish list

$6.99

102 inch stainless steel whip antennas have a reputation for unequalled performance for mobile radio applications. The Kaliber K101X, AU101X CB antenna steel whip tie down protects your antenna by fastening in down and out of the way when not in use.

In stock
+
Add to wish list

$26.24
A CB antenna switch will allow you to install multiple antennas on one radio, or multiple radios on one antenna. 
In stock

$20.99

Do you need full sized performance from your Wilson 1000, 5000, or Trucker series antennas while still fitting in the garage or under low clearance spaces? Don’t want to compromise size for performance? Then get yourself the Wilson 880900817 Short Load Adapter and Whip – you’ll fear no space while enjoying wall to wall signal strength! Best of all the short load adapter is just as tough as your original Wilson antenna!

In stock
+
Add to wish list

$18.89

The Maxrad BMA NMO mobile radio mount with 17 feet of coax wire is ready to connect to your antenna and radio with a solder PL259 connector. All brass the BMA is designed for 3/8 to ¾ inch holes where installation from above is preferred.

In stock
+
Add to wish list

$18.89

If you’re looking for a complete roof mount for your Maxrad mobile antenna this is the one. The NMO die cast mount is solid and provides installation from above. The Maxrad Roof mount with coax comes with a 2 year Manufacturer Warranty.

In stock
+
Add to wish list

$2.09
Factory replacement tips for Firestik CB Antennas
In stock

$10.49

FireStik’s K145A cowl mount low profile design allows you to mount your mobile antenna where you want it. The K4A stud rapidly connects any PL259 terminated coax to your radio and antenna for a standardized mobile solution that is clean looking and FIreStik strong.

In stock
+
Add to wish list

$13.56

It’s important to protect your mobile antenna from the elements. The Larsen RGNMOSS gasket for the NMO coil on Larsen antennas creates a watertight seal preventing moisture from entering the NMO mounting hole or coil.

In stock
+
Add to wish list


$19.94

This CB coax and antenna stud kit will allow any 3/8" x 24 threaded antenna to be mounted to any flat surface with a 1/2 inch hole in it.  The cable is available in 9 and 18 foot lengths. 

In stock

$22.31
NMO mount and coax with a PL259 connector. 
In stock
+
Add to wish list

$9.90

The NMOCAPB rain cap for NMO Mounts offers protection when you need it. Provides peace of mind when Mother Nature gets ugly.

Out-of-stock Add to wish list

$10.49

Larsen NMOB Mounting Hardware for professional quality NMO antennas. Mount your custom NMO antenna where you want it with style.

In stock
+
Add to wish list

$4.81

Larsen ONMOMNT NMO O-Rings provided in a handy 3 pack. Replacement part for Larsen NMO antenna mount bases. Installs on the underside of NMO, seals moisture out of coax.

In stock
+
Add to wish list

$13.64

If you’re on glass CB antenna has seen better days, the reinstall kit from Larsen Antennas can reinvigorate and extend its life. Perhaps years of exposure to UV light has caused your antenna to slip from the window surface, ruining your radios signal. This all in one kit will get professional installation results on the first try.

In stock
+
Add to wish list

$49.99
This kit will replace all the parts of a Wilson 5000 roof mount antenna below the mounting surface.  This kit includes the coax with attached mount...
In stock
+
Add to wish list

$26.24
This 5" magnetic mount includes 18' of coax with a PL259.  This is a great, simple way to mount your CB antenna.
In stock
+
Add to wish list

$19.99 $9.99

Fold over lift and lay stud mount for CB radio antennas. When you have to get your antenna down but not out this is the perfect alternative. No need to remove your antenna with the lift and lay stud. Threaded to fit all standard antennas and mounts.

In stock
+
Add to wish list

$18.85

The Accessories Unlimited AUDODGE2 fender mount was designed for Dodge pickups models from 2004 to 2008. The AUDODGE2 is constructed from durable stainless steel and can hold antennas up to 5 feet safely and securely.

In stock
+
Add to wish list

$62.99

ProComm ground plane kit for base station CB antennas. Install your Patriot or Proton antenna on top of the this ground plane for a 1/3 boost to your radio performance.

In stock
+
Add to wish list

$6.29

Mounting an NMO antenna to your vehicle is not supposed to be difficult. The PCTEL TGB34 L bracket is suitable for any vertical surface. A small footprint offering big performance the TGB34 includes matching mounting screws.

In stock

$129.99
If you want to step up from a basic SWR meter, consider this 3 meter high-watt meter from Astatic.  It features 3 easy to read meters (SWR, power, and...
In stock
+
Add to wish list

$15.74
Spring for Maxrad / PCTEL MAX series antennas. 

$25.71

Designed specifically for thick mounting plates the Maxrad MTPM NMO to SO239 connector provides a tight grip on your antenna and cable. Solid Brass fittings with non-slip nuts and washers keep your NMO antenna secure.

In stock
+
Add to wish list

$22.00
This adjustable claw mount is very versatile and well suited for applications that require the antenna to be easily detachable.
In stock
+
Add to wish list

$15.70

The ProComm Bird Perch-style mount for Volvo trucks provides the metal to metal necessary for proper grounding of mobile radio antennas. Threaded to fit the mounting holes on the mirror assembly of Volvo semi-trucks.

In stock
+
Add to wish list

$79.39
Magnet Mount
Procomm's multiple magnet CB antenna mounts are for heavy duty applications that require extra hold without a permanently attached mount. Each of these...
In stock

$14.65

A durable passenger side CB antenna mount for 1999-2001 GMC & Chevy pickups, the SAGM1-R from Accessories Unlimited fits nicely. Install antenna 4 foot or less with confidence.

In stock
+
Add to wish list

$36.74

The Hustler BM1 wrap-around bumper mount is a great mount for off-road vehicles that have metal bumpers. A heavy duty CB antenna mount constructed from stainless steel the BM1 fits bumper up to 18 inches and only requires a scant 5/16 clearance between bumper and vehicle body for a custom looking install.

In stock
+
Add to wish list

$11.54

ProComm manufactures quality communication products for CB, Amateur, and two-way communications. ProComm’s CB Coax Cable RG8X with PL259 and Ring Terminals is the go to coax for single antenna installations. The RG8X mini-8 coax provides a highly flexible, easy to route cable for mobile installs and is available in lengths to suit any installer’s desire.

In stock

$14.44

High quality RG8X Mini-8 coax cable offers outstanding performance for CB or 10 meter radios. Flexible yet strong Mini-8 is often the cable of choice for routing inside vehicle chassis and cabs. ProComm offers quality processed RG8X coaxial cables complete with 100% tested, hand soldered dual PL259 connectors for convenience. You know that your coax will offer low loss, low noise with your CB radio installation – the coax will be one less problem to worry about when using high quality RG8X cable.

In stock

$26.24

This meter from Astatic combines a power meter with an SWR meter into one device.  An SWR meteer is essential to tune your CB Antenna. 

In stock
+
Add to wish list

$32.54
Fender Mount

The MKJ4R from Firestik is a hood/fender antenna mount kit that includes a mount and coax for CB and other antennas.  It is compatible with 1997 to 2006 Jeep Wranglers

In stock
+
Add to wish list

$36.74

An adjustable stainless steel CB antenna mount that allows you infinite possibilities. The FireStik MK274R is designed to be the ideal choice for automotive hood, trunk, or hatchback antenna placement. The MK274R is actually a complete mounting kit that mates the SS-274 channel mount with FireStik’s professional quality Fire-Flex coaxial cable that features the Fire-ring connector.

In stock
+
Add to wish list

$36.74
Side Mount

This side mount CB antenna kit is perfect for vehicle or RV installations.  The coax attaches on the inside of the mounting surface, making it easier to route.

In stock
+
Add to wish list

$2.99

FireStik RT-1 terminals are matched for proper amperage rating of RG58/59 high performance coaxial cable. Whether you are performing an upgrade or necessary repair to your coax system, using the right connector correctly is key to optimizing your radio’s performance. Demand genuine FireStik Antenna Company components when only the very best will do.

In stock
+
Add to wish list

$34.99

The FireStik MK204R kit includes 18 feet of CB coax and a versatile mount that adjusts to fit in a variety of locations on your vehicle. The all stainless steel antenna mount was designed for door jambs, but it also works as a fender, hatchback, or side mount. The FireStik door jamb mount extends and adjusts allowing for a huge variety of angles for antenna installations.

In stock
+
Add to wish list

$10.49

ProComm professional quality RG58 CB coax cable with pre-installed PL259 connectors makes installing a variety of antennas simple. The PPXJ RG58 cable comes in a lengths suitable for CB, Amateur, first responder, and WLAN antennas. If you want made in the U.S.A. 100% tested coax wire for you next communications project RG58, this cable is ready when you are.

In stock