Product filters Product filters

CB Antenna Mounts

Whether you already know exactly which mount you need, or you are just trying to figure out where to start, we can help!  CB World carries hundreds of antenna mounts from manufacturers like Firestik, Teraflex, Accessories Unlimited and more. When it comes to mounting a CB antenna, no one gives you more options than CB World!

If you have an idea of what CB antenna mount you want you can narrow your search with the filters to the right, or search by make, model, description, etc in the search box above.

If you are just getting started you can find more info on choosing a CB antenna here.

The placement of your antenna affects the SWR, the radiation pattern, and the height clearance of your vehicle. The ideal location for your antenna is in the center of the roof of your vehicle. Since this usually doesn't work for most people, here are some important things to remember when choosing a mount:

  • You want as much metal as evenly spaced around the base of the antenna mount as possible
  • You want the CB antenna as high up on the vehicle as possible.
  • You want the antenna vertical (straight up and down)
  • You don't want the antenna mounted where is will break off too easily
$32.54
Fender Mount

The MKJ4R from Firestik is a hood/fender antenna mount kit that includes a mount and coax for CB and other antennas.  It is compatible with 1997 to 2006 Jeep Wranglers

In stock
+
Add to wish list

$20.99

This is a versitle mount designed for mouting in vehicle door jambs.  It will also mount in hood channels, hatchbacks, and other locations.  Constructed from durable stainless steel.  Made in the USA.

In stock

$18.89

The SS294A “over rail” Stake Hole mount from FireStik® will fit most pickup trucks. It allows an easy mounting solution for adding a CB antenna in the Stake Hole pockets along the bed of your truck, running the cable out of the bottom of the pocket.

In stock
+
Add to wish list

$18.89

The Maxrad BMA NMO mobile radio mount with 17 feet of coax wire is ready to connect to your antenna and radio with a solder PL259 connector. All brass the BMA is designed for 3/8 to ¾ inch holes where installation from above is preferred.

In stock
+
Add to wish list

$19.94

The Accessories Unlimited AUGM2-L fender mount was specifically designed for Chevy pickups and SUV's. The AUGM2-L mount is constructed from high quality stainless steel and includes a 3/8" x 24 threaded antenna stud for mounting CB antennas.

In stock
+
Add to wish list

$17.99

The Accessories Unlimited AUF2-L fender mount was specifically designed for 1999-2009 Ford F series trucks. Constructed from high quality stainless steel the AUF2-L mount can be installed using existing bolts under the hood. This provides an easy no drill antenna mounting solution for owners of newer model Ford F-series pickups and some models of Chevy and GMC trucks.

In stock
+
Add to wish list

$10.49

Accessories Unlimited AUSM4 stainless steel mount will bolt to any flat vertical surface. The addition of U-bolts (not included) will allow mounting to horizontal or vertical posts. The AUSM4 is a versatile 90 degree side antenna mount that works as hard as you. If you’re looking for a no non-sense antenna mount without the fluff get the AUSM4 from CB World.

In stock
+
Add to wish list

$59.80

The Hustler SSM-1 professional ball mount and spring a heavy duty combo best suited for larger antennas like the 102" steel whips or 5 foot fiberglass antennas. Rugged, all stainless steel CB antenna mount that will support the tallest two-way radio antennas available the SSM-1 requires drilling to install the mount.

Out-of-stock Add to wish list

$77.95 $59.49

This mount was designed specifically to fit the spare tire rack for Jeeps.  The coax has a removeable PL259 connector for easy cable routing.  Uses existing bolts on the Jeep.  No drilling required!

In stock

$15.21
3 Way Mount

Firestik 3 way mounts are a great solution for mirror brackets, flat vertical surfaces, horizontal or vertical tubing, rails, and more.  Available in stainless steel or plated.

In stock

$20.99

The Accessories Unlimited AUBALL is our most popular CB antenna ball mount. This versatile style of mount allows you to mount an antenna to any flat surface. The ball rotates a full 360 degrees to adjust for any angle of the mounting surface. The AUBALL mount requires you to drill holes in the mounting surface. You’ll need access to the back side of the AUBALL in order to complete the installation. This a great antenna mount for antennas that are up to four feet tall.

In stock
+
Add to wish list

$19.94

This CB coax and antenna stud kit will allow any 3/8" x 24 threaded antenna to be mounted to any flat surface with a 1/2 inch hole in it.  The cable is available in 9 and 18 foot lengths. 

In stock

$28.34

The MK294R mini-kit from the FireStik Antenna Company includes 18 feet of high quality coax and a stake hole mount. The mount installs in the stake hole pockets on the bed of a pickup with the coax attaching to the top of the mount. A simple, rugged, convenient method of attaching a two-way radio or scanner antenna to your pickup truck.

In stock
+
Add to wish list

$19.41
Stake Hole Mount

The FireStik Antenna Company strikes again. The stainless steel extended stake hole mount for pick-up beds takes advantage of the pick-up bed design for a no hole drilling required CB radio antenna install. Stout enough for the tallest two-way radio antenna and available with a choice of plug or lug antenna mount stud. The perfect solution for a pick-up with a canopy or camper shell.

In stock

$7.86

Antenna studs are the most critical component of any two-way radio transceiver to antenna link. The high quality stud mounts produced by the Firestik Antenna Company have been the industry standard for many years. Don’t let an inferior aluminum antenna stud result in signal loss for your transceiver use the best, ask for a genuine FireStik antenna stud.

In stock

$56.74

A seamlessly integrated, factory look for CB antenna mounting on 2007 to 2015 Jeep Wranglers is easy with the TeraFlex tire mount from CB World. An antenna mounting solution including high quality coax with matched connectors has been expertly selected for best in class performance with your CB radio and Jeep Wrangler.

In stock

$11.29

A quality NMO fender mount from Kalibur products. The NMO antenna fender mount is a unique and great looking solution for those who are adverse to a roof top installation of their NMO radio antennas. Universal mounting versatility that provides secure attachment for any antennas that require a ¾ inch mounting hole. Place it where you want, use it with confidence the KCOMM1 from Kalibur is made for the unique individual.

In stock
+
Add to wish list

$36.74

This specialized CB antenna mount installs under the tail light of many Jeep Wrangler models. The simple installation and impressive finished look of this mount make it very popular with Jeep owners. Choose from driver or passenger side mounts for a secure, reliable CB antenna mounting solution.

In stock

$20.99

This fender mount was designed for newer Chevy pickups, 2010 - 2013.  It also fits some Toyota Tacoma pickups.  No drilling required on compatible pickups.  Includes CB antenna stud.

In stock
+
Add to wish list

$14.16

This fender mount is a universal solution for vehicles with no specific CB antenna mount made for them.  This mount will only work on vehicles with a vertical channel between the fender and hood with no turns. 

In stock
+
Add to wish list

$16.79

The FireStik SSJ4 fender mount was designed specifically for Jeep Wranglers. The SSJ4 mount is constructed from stainless steel and will require drilling holes to install. It mounts on the driver side or passenger side of the vehicle. The SSJ4 antenna mount will securely hold antennas up to four feet tall and requires coax cable with ring connectors to complete the installation.

In stock
+
Add to wish list

$18.85

The Accessories Unlimited AUDODGE2 fender mount was designed for Dodge pickups models from 2004 to 2008. The AUDODGE2 is constructed from durable stainless steel and can hold antennas up to 5 feet safely and securely.

In stock
+
Add to wish list

$36.74
Side Mount

This side mount CB antenna kit is perfect for vehicle or RV installations.  The coax attaches on the inside of the mounting surface, making it easier to route.

In stock
+
Add to wish list

$26.24

If you’re full size car or truck has a deep groove channel chances are that the AUC11K CB antenna mounting kit will fit perfectly. The AUC11K is from Accessories Unlimited and is furnished with all stainless steel antenna mount, stud, and 18 feet of premium coax with EZ on PL-259 connector. The AUC11K is also a great solution for import vehicles where no specific mount is specified.

In stock
+
Add to wish list