Cobra High Gear CB antenna for HD trucks or semis. If you need a powerful, rugged CB antenna to match your truck look no further than the HGA7000.
A center loaded trucker antenna that is suited for both single or co-phase antenna systems, the HGA7000 can be mounted on truck mirrors, bars, and up high for best in class performance. The HGA7000 is ready to install on any standard 3/8x24 antenna mount and is easily field tunable for lowest SWR with your CB or 10 meter mobile radio.
The Cobra High Gear HGA7000 Trucker CB Antenna has been favorably compared to the Wilson Trucker antenna which costs 3x more!
The Cobra trucker CB antenna is rated to an amazing 6000 watts making it capable of handling the most powerful 10 meter radio signals. Reaching out and communicating across the highway is just as easy and as picking up the mike and calling breaker, breaker or CQ, CQ, CQ!
If your CB is equipped to receive N.O.A.A. Weather channel radio, the Cobra HGA7000 can bring in the signal! Donât risk be caught on the open road during the nasty weather, get the weather information you need in a timely manner with a Cobra High Gear antenna!
The Cobra HGA7000 is a heavy duty antenna that will stand up to the open road and last for years of reliable service.
26-30 MHz radio
N.O.A.A. Weather channel capable (N.O.A.A. radio receiver required)
Compatible with all CB and 10 meter radios. Suitable for use with all mounts and accessories that accept 3/8x24 threaded ferrule. Can be used a part of a single or co-phase antenna system.
A heavy duty spring is a recommend antenna accessory for use with the Cobra HGA7000. If youâre not sure that you need an antenna spring as part of your antenna installation be sure to refer to CB Worldâs guide to choosing CB antenna springs for complete information on this important accessory.
Tune your antenna
CB World has put together a complete step by step guide for the setting the SWR on a CB Antenna. Donât neglect this important step in installing your mobile radio antenna!
6000 watts power rating
- Non corrosive stainless steel whip, shaft, and hardware
- Heat resistant, fade resistant center load shell
- Broad banded frequency range (26-30MHz)
- Works with all CB and 10 meter radios
- Weather band reception
- Field tunable
- 6000 watt power handling
- 3/8" x 24 threaded base
- 10 inch shaft
- 62 inches fully assembled
- One year warranty
- 5.5 Ft.
- 3/8 inch x 24
No posts found