FireStik SS134 clamp-on Stainless Steel Clamp-on Flat Mount is available with your choice of ring terminal or S0239 coax termination. The Firestik SS134 is an all stainless steel CB antenna mount specifically designed to install on the flat arm of side view mirrors. These mirrors are common on pickups and semi-trucks.
The SS134 mount will fit any flat (square or rectangular) post or bracket 1.25" wide and .75" tall. The upper bracket is 4.6" (117mm) long by 1" (25mm) wide. The distance between the stainless steel clamping bolts (supplied) allows the mount to span material up to 1.4" (36mm) wide. You can also leave off the lower bracket and use the mount as a flat mount on any horizontal surface.
When the SS134 antenna mount is used as a clamp-on style mount no drilling will be required during installation. If you choose to remove the lower bracket attachment to a flat surface drilling holes may be required to secure the mount for your individual installation.
The SS134 comes with either a K-4 or K-4A antenna stud for crimp-on or screw-on coaxial cable connection.
The FireStik Clamp-on CB antenna mount is designed for antennas up to 4 feet (1.2 m) tall.
The FireStik SS134 CB antenna mount is designed to support all antennas up to four feet tall with 3/8x24 threaded ferrule.
High quality RG58A/U coax with either lug or SO239 connector is recommended for use with the FireStik SS134 antenna mount.
- Designed for Flat Armed Side Mirror Support Arms
- No Drilling Required
- Dimensions 4.6" Long X 1" Wide
- Bracket can Span 1.4"
- Drop the Bottom Bracket and Use for Flat Horizontal Mount
- Available with K4 stud for terminal connections or K4A stud for PL259 Connection
- Still made in America
- Two year warranty
CB Antenna Mount
- SO239 (Screw On Connector)
- Lug (Terminal Connectors)
- Flat Mount
No posts found