Antenna springs are great protection for the antenna, mount, and vehicle. Think of the SS3M2F Medium Duty Stainless Steel Spring with Two Female Ends as cheap insurance for your 2 or 3 foot FireStik antenna.
After all you’ve not only spent your hard earned money on a top of the line CB antenna, but you have also invested time and energy into tuning your antenna SWR. If your antenna encounters a low hanging obstacle (LHO) it could become damaged. Which means you’ll have to start the process over again. Now if the LHO is struck with enough force you could lose the mount or damage the vehicle attachment point. Why risk an expensive trip to the body shop for repairs? Invest in a FireStik antenna spring
These springs are made from long lasting, top grade electro-polished stainless steel.
The upper and lower inserts are made of chrome-plated machine brass and have standard 3/8"-24 threads to fit all Firestik antennas, mounts and accessories. FireStik double female threaded antenna springs are for use where the mount and antenna are both male threads with 3/8x24.
The medium duty model spring works especially well with their 2ft "KW" & "FS" series antennas as well as the 3ft "FL" or "RP" antennas. For taller antennas the heavy duty model spring may be used with antennas up to 60". Physically, each spring is about 3.0" (76mm) tall with a diameter of 0.800" (20mm).
You can find more information on CB antenna springs check out CB World’s help center.
- Electro-polished stainless steel
- Medium duty antenna spring
- Double female ends
- 3/8x24 threads
- For 2 foot FireStik KW & FS series antennas
- For 3 foot FireStik FL & RP series antennas
- Measure approximately 3.0 inches (76 mm) tall and 0.800 inch (20 mm) in diameter
- 2 year limited warranty
- Proudly made in the USA