No items found matching the search criteria
Accessories Unlimited AUMAGS 36" MAGNET MOUNT CB ANTENNA W/SPRING (BLACK)
ACCESSORIES UNLIMITED - 3 FOOT LIFT & LAY CB MARINE ANTENNA KIT WITH STAINLESS STEEL HARDWARE
Accessories Unlimited AUCB59 triple socket cigarette plug adapter adds a connector for CB radios, GPS, and other 12 volt mobile electronics.
Accessories Unlimited CB antennas are rugged, fully featured for use with any manufacturers radio and the tunable tip makes it easy to set SWR
ACCESSORIES UNLIMITED - 3' FIBERGLASS CB ANTENNA WITH 3/8" X 24" THREADS - BLACK
ACCESSORIES UNLIMITED - 3' FIBERGLASS CB ANTENNA WITH 3/8" X 24" THREADS - White
ACCESSORIES UNLIMITED - 4' FIBERGLASS CB ANTENNA WITH 3/8" X 24" THREADS - white
ACCESSORIES UNLIMITED - 4' FIBERGLASS CB ANTENNA WITH 3/8" X 24" THREADS - black
Accessories Unlimited Small flat mounting plate with stud for attaching CB, scanner, and amateurr radio antennas to tool boxes and similiar surfaces.
ACCESSORIES UNLIMITED - 5-1/2" LONG STAINLESS STEEL FLAT ANTENNA MOUNT WITH stainless 3/8"X24" LUG STUD.
Accessories Unlimited AUCB58 dual socket cigarette plug adapter adds a connector for CB radios, GPS, and other 12 volt mobile electronics.
Accessories Unlimited AUCB39 Large vise grip with a SO239 stud mount for rapid deployment of CB and Ham radio antennas all most anywhere!
This is an economical off road CB antenna from Accessories Unlimited. This fiberglass antenna is available in several lengths and is suitable for many trucks, Jeeps, and 4x4’s.
Accessories Unlimited AUSS3M medium duty stainless steel springs are designed for use with 2 foot CB antennas, or light 3 foot antennas. FireStik Firefly, Wilson Flex, Everhardt, and ProComm radio antennas can all benefit from the shock protection provided by the AUSS33M spring.
The Accessories Unlimited AUBALL is our most popular CB antenna ball mount. This versatile style of mount allows you to mount an antenna to any flat surface. The ball rotates a full 360 degrees to adjust for any angle of the mounting surface. The AUBALL mount requires you to drill holes in the mounting surface. You’ll need access to the back side of the AUBALL in order to complete the installation. This a great antenna mount for antennas that are up to four feet tall.
A made in America Dual Mirror Mount CB Antenna kit from Accessories Unlimited great looking performance for your special CB applications
Heavy duty springs are best used with antennas up to 5 feet tall. The AUSS3H is a rugged, stainless steel antenna spring that includes a hexagon top and bottom cap that is easily tightened with an adjustable wrench.
Accessories Unlimited AUSM4 stainless steel mount will bolt to any flat vertical surface. The addition of U-bolts (not included) will allow mounting to horizontal or vertical posts. The AUSM4 is a versatile 90 degree side antenna mount that works as hard as you. If you’re looking for a no non-sense antenna mount without the fluff get the AUSM4 from CB World.
Accessories Unlimited does it again! The ACUB9 is an all-aluminum antenna mount that comes complete with an SO239 stud mount. Designed to fully connect to horizontal bars and racks the AUCB9 proudly supports antennas up to 5 feet in height and offers simple, solid bolt on attachment. See for yourself why Accessories Unlimited is the unsung hero of CB accessories.
Accessories Unlimited proudly offers it’s all stainless steel hood channel mobile antenna mount. The AU KVAN mount is designed to hold antennas up to 5 feet tall securely on full size passenger van fenders. In the majority of cases drilling holes can be avoided by using an existing body bolt to attach the mount.
Accessories Unlimited AU480 4 foot tuneable antenna with weather trap provides great performance and durability for your CB radio installation at a reasonable price. The AU480 can handle 750 watts of peak power and for any mobile radio communication demand.
Why void the warranty on your new Toyota truck? No need to drill holes to mount a CB antenna with the AUT2-L fender mount from Accessories Unlimited and CB World. The AUT2-L blends with the smooth flow of the hood on Toyota pickups and sport utility vehicles delivering function and style that holds up to the toughest stuff.
The Accessories Unlimited CB Glass Mount antenna is a 25 inch antenna that makes a bold statement. When you need the security of CB communications without the attention that full size antennas can draw, the AUCBGM is just what you need.
If protecting your antenna, mount, and vehicle from damage that occurs due to impact with low lying objects you’ll want a top quality antenna spring. Even short and lightweight CB antennas need the extra bounce a spring offers. The light duty CB antenna spring from Accessories Unlimited offers protection without undue bulk. Get yours today at CB World!
The Accessories Unlimited AUGM2-L fender mount was specifically designed for Chevy pickups and SUV's. The AUGM2-L mount is constructed from high quality stainless steel and includes a 3/8" x 24 threaded antenna stud for mounting CB antennas.
The Accessories Unlimited AUDODGE2 fender mount was designed for Dodge pickups models from 2004 to 2008. The AUDODGE2 is constructed from durable stainless steel and can hold antennas up to 5 feet safely and securely.
If you’re full size car or truck has a deep groove channel chances are that the AUC11K CB antenna mounting kit will fit perfectly. The AUC11K is from Accessories Unlimited and is furnished with all stainless steel antenna mount, stud, and 18 feet of premium coax with EZ on PL-259 connector. The AUC11K is also a great solution for import vehicles where no specific mount is specified.
Mounting a two-way radio antenna on your Jeep can prove challenging. Just like most things in life it can be all about the best compromise. Now you won’t have to choose between safely securing your CB or Amateur radio antenna and achieving excellent signal strength. Accessories Unlimited AUJ1 Fender mount for 2007 and newer Jeep JK Wranglers answers the call! Keep a watchful eye on your antenna and never risk damage due to inadvertently striking a low hanging limb, garage entrance, or other “hard” medium. The fender also puts the most metal under your CB antenna for best refraction of RF signals. A true win-win with the AUJ1 and CB World!
ACCESSORIES UNLIMITED - 3 FOOT BLACK LOW PROFILE MAGNETIC MOUNT CB ANTENNA WITH 15' COAX
A clamp on antenna mount designed for attaching to mirror frames the 3 way aluminum mount from Accessories Unlimited
The Accessories Unlimited AUF2-L fender mount was specifically designed for 1999-2009 Ford F series trucks. Constructed from high quality stainless steel the AUF2-L mount can be installed using existing bolts under the hood. This provides an easy no drill antenna mounting solution for owners of newer model Ford F-series pickups and some models of Chevy and GMC trucks.
Tired of the hassle of manually removing your CB, amateur radio, or VHF/UHF antenna every time you need to clear the entrance to a garage or parking structure? Installing an Accessories Unlimited antenna quick disconnect will give you the security and freedom to remove and install your antenna at any time. Designed for standard antennas and mounts with 3/8x24 threads the AUQD will handle all of your quick disconnect needs.
A tall hood antenna mount can be tough to find if your vehicle isn’t one specified by the makers for CB antenna mounts. Now Accessories Unlimited has filled the void with their AUC10K tall hood mount and it’s complete with top of the line RG58 coaxial cable. The coax is fitted with AU’s unique EZ on PL259 connector, this makes cable routing a breeze – especially through firewalls and under carpeting or headliners.
Economical protection for your CB antenna a heavy duty spring looks great and keeps your antenna from unintended damage. Low hanging limbs have a way of snap at antenna, why risk damage and having to reinstall and retune your antenna? An Accessories Unlimited AUC30 heavy barrel spring works protects the tallest antennas.
An adapter that reliably connects your CB Antenna to its mount. The Standard Thread CB Antenna Stud from Accessories Unlimited is one stout part that won’t let you down. With your choice of coax connections it fits your antenna installation.
If the thought of drilling one or more holes into the fender of your Ford F150 or Expedition is not an appealing option the KF1-L hood mount for CB antennas is your answer! Attaches to existing body bolt between fender and hood along the channel to securely support mobile radio antennas up to five feet tall. The KF1-1 is for all antennas and accessories with 3/8x24 threaded ferrules and is all stainless for longer life in the most extreme conditions.
A great looking truck deserves great accessories that are designed just for it. The CB Antenna mount for GMC and Chevy pickups from Accessories Unlimited performs as good as it looks. No excuses - just accessories that fit right.
The best way to preserve the lines of your Toyota T100 is to install a CB antenna mount that is specifically designed to fit. The Fender Mobile Antenna Mount for the Toyota T100 fits exactly as you would expect it. Right fit, no drilling required, no muse.
An SWR meter is an essential tool for tuning your antenna. This is our most popular meter. It comes with a 3 foot coax for connecting it in line between your radio and antenna. Instructions for tuning your CB radio antenna are included.
A comprehensive installation kit with everything needed to install a mirror mount CB antenna on your vehicle.
Hanging your two-way radio microphone where it can be reached, when you need it should not be difficult. If your old mic clip has seen better days, the Metal CB microphone clip from Accessories Unlimited delivers all the support you need. A complete and durable solution for sagging mics is possible with the AUMH2.
Ford’s number one F-series trucks deserve a CB Antenna mount that not only looks great but is as rugged as the trucks themselves. An all stainless drivers side mobile radio antenna mount the fits right and fits your Ford truck or SUV the AUF4-L will complete your radio system.
A complete CB antenna kit from Accessories Unlimited with top quality components. The Under Hood CB Antenna Kit is a great choice if a model specific mount is not listed for your car or truck. A flexible fiberglass antenna, stainless steel mount and hardware are combined with high quality RG58 coax for a completely finished easy to install CB antenna for your two-way mobile radio.
If you’re tired of cheaper aluminum “bird perch” style CB antenna mounts bending and twisting on your Cascadia truck while you head down the highway, replace them with the Accessories Unlimited MMCAS mounts. The MMCAS CB antenna mirror mount is a solid one piece design that is built to stand tall last. The MMCAS preserves the streamlined look and aerodynamics of your big rig, while providing secure anchors for your all-important CB radio antennas.
Accessories Unlimited providing functional performance that just looks good.
Sometimes the best solutions are the simple ones. A mono earphone for listening to a CB, ham radio, or scanner requires nothing high tech. Connects easily to any 3.5mm external speaker outlet the AUDEPD1 earphone is elegantly simple, yet highly effective.
This fender mount was designed for newer Chevy pickups, 2010 - 2013. It also fits some Toyota Tacoma pickups. No drilling required on compatible pickups. Includes CB antenna stud.
This simple plastic CB microphone hanger conveniently hangs from anything, giving you a place to keep your mic when not in use. Constructed from durable, heavy plastic.
A durable passenger side CB antenna mount for 1999-2001 GMC & Chevy pickups, the SAGM1-R from Accessories Unlimited fits nicely. Install antenna 4 foot or less with confidence.
The AUD402 is a highly adjustable universal mount for CB radio applications and many audio products.
Looking quality replacement CB radio mounting knobs with plastic knurled heads? The AUDX2 CB radio side knobs provide easy to grip, threaded installation compatible with most two-ways. CB World carries three different sizes of mounting side knobs to fit your radio and replace lost or worn originals with style.
CB microphone clip designed to secure your mic when not in use with magnetic holding power. The AUMH1 from ProComm clip your mic where you want.
AUVS26 Velcro strips are 2 inch x 6 inch sized and have an adhesive side that allows you to stick them to two surfaces that can then be joined by the Velcro. The hoop and loop fastener offers a cement like hold that works well for securing heavier electronics to car dashboards and similar hard to adhere to surfaces. AUVS26 strips a great alternative for dash mounting for CB radios, when drilling is not desired.
The AUFLEX antenna is a superior choice for a flexible CB radio antenna and very popular with Jeep and offroad vehicle users. The tunable tip makes for a simple install.
This fender mount is a universal solution for vehicles with no specific CB antenna mount made for them. This mount will only work on vehicles with a vertical channel between the fender and hood with no turns.
This is a universal fender mount for vehicles that don't have a specific mount made for them. This mount will only work on vehicles with a vertical channel between the fender and hood with no turns.
Glass Mount Scanner Antenna Kit with BNC Connector
AU30TT 30" TWIST-N TUNE ANTENNA
AU40TT 40" TWIST-N TUNE ANTENNA
The Dual Trucker CB antenna kit is a complete ready to install co-phase antenna system at a fantastic price! High quality components that have been selected by the professional CB technicians at CB World guarantees you will be pleased. Twin Cobra HighGear trucker antennas, two 3 way mirror mounts, and premium armor flex coaxial cable integrate fully for high power two-way radio communications.
CB mounting bracket for Galaxy DX959, Cobra 148 and Uniden Grant AU68
The Kalibur KCBMIC is a universal CB microphone that boasts strong, clear audio. Features of the KCBMIC include a smooth operating PTT button, a metal mic button hanger, and a 9 foot coiled cord with strain relief and 4 or 5 pin connector.
A T-connector for your custom dual antenna mounting needs the AUT259 provides convenient connectivity with 1 male to 2 female UHF connectors. This high quality T coax connector provides for reliable mobile radio antenna installation.
This mount was designed specifically to fit the spare tire rack for Jeeps. The coax has a removeable PL259 connector for easy cable routing. Uses existing bolts on the Jeep. No drilling required!
If you are looking to mount a CB or ham radio antenna to a flat surface but lack a tough, quality made mounting bracket to make it happen CB World has the answer. The SS124 all stainless universal flat antenna mount from the FireStik Antenna Company. The possibilities are almost unlimited for the SS124. If you can visualize a way to attach the flat antenna mount, it will hold your antenna without fail. Choose the SS124 for stud to lug connection and the SS124-A for stud to screw on connections.
A seamlessly integrated, factory look for CB antenna mounting on 2007 to 2015 Jeep Wranglers is easy with the TeraFlex tire mount from CB World. An antenna mounting solution including high quality coax with matched connectors has been expertly selected for best in class performance with your CB radio and Jeep Wrangler.
The K1-A quick disconnect from Firestik has an internal locking mechanism that is protected from weather and damage. The secure operation of the K1-A allows you to quickly detach your CB antenna when you enter a parking structure, driving under trees, entering a car wash, or if you want to prevent the theft of your finely tuned mobile radio antenna.
This specialized CB antenna mount installs under the tail light of many Jeep Wrangler models. The simple installation and impressive finished look of this mount make it very popular with Jeep owners. Choose from driver or passenger side mounts for a secure, reliable CB antenna mounting solution.
The Firestik FS II is one of the most popular antennas available today. These high quality fiberglass antennas are made in the USA. They have several options for color and length. With the bare hands tunable tip, tuning the antenna is a snap!
The Ultimate fiberglass whip CB antenna, the HG antenna from Cobra is proudly made in the USA. A true power house of an antenna, it is a top loaded whip wound with 20 gauge heavy duty copper wire for better power handling. The HGA features ultrasonic water seal, non-corrosive chrome plated construction, and weather radio reception. The Cobra HGA is the perfect compact fiberglass antenna for any CB or 10 meter mobile radio setup!
Are you looking to mount your CB, Ham, or marine radio overhead or under the dash? Do you want the ability to quick release your valuable electronics to take it along when you leave your vehicle? The MAXiMOUNT universal mount from Midland will get the job done in spades! Built to last a lifetime the UV stabilized nylon mount is waterproof and won’t fade when exposed to sunlight. Fully adjustable over 360 degrees rotation and able to tilt up to 30 degrees in angle the 21-200 universal radio mount won’t disappoint.
A complete CB antenna kit that is ready to install just in time for the Holiday season! The Cobra HGA300kit & HGA400kit will please any CB radio operator.
ALUMINUM TAIL LIGHT ANTENNA MOUNT, DUAL 1/2" HOLES 18' COAX & SO239 STUD FITS 1998 TO 2006 JEEPS
© 1979-2016 CB World.