PC108 8 Inch Adjust-A-Match Tunable Antenna

PC108 8 Inch Tunable CB Antenna

 
$18.89
30 days
PC108
In stock
+

Description

The PC108 8 Inch Adjust-A-Match Tunable Antenna from ProComm is an excellent fiberglass CB antenna for use when a low profile is an absolute must.

This is our shortest CB antenna at 8 inches. When installed correctly, this antenna will achieve good operating SWR. At only 8 inches, the PC108 antenna’s range will be limited.

If you are in need of the ultimate low profile, very low clearance antenna the PC108 is definitely worthy of your consideration. The PC108 make a great Off-road antenna for club tours where maximum radio range is not a high priority. In fact our customers who have installed the PC108 on their Jeeps report excellent reception and durability with this easy to tune antenna.

The PC 108 CB antenna is rigid, so it can't stand up to striking objects well. This can be countered with a light spring if mounting above the roof line of your vehicle. A 3/8" x 24 threaded base ensures that the PC108 is ready to install on any standard antenna mount.

Frequencies
27 MHz CB radio frequencies

Compatibility
Fully compatible with standard antenna mounting studs threaded for 3/8 x 24

Springs
Choosing the right spring to match your antenna and mounting requirements is not always cut and dried. Even the shortest antenna such as the PC108, may benefit from having a light duty spring installed. For complete information on CB antenna springs visit CB World’s help center.

Coax
A high performance CB radio installation requires low noise coax cable such as ProComm RG58 PLxj coaxial cable. Be sure to match your antenna stud to the correct coax connector for your installation.

Tune your antenna
Tuning your CB antenna for a low SWR setting is the best way to guarantee two-way radio performance and protect circuitry from damage. Antenna tuning is not a complicated process, but it is worth performing this task correctly.

Power handling
25 watt rated

Product features

  • 8 inch fiberglass based loaded CB antenna
  • Ring tunable – no trimming of antenna necessary
  • Pre-tuned to 27 MHz
  • Field tunable for best performance
  • Designed for low SWR
  • Chrome plated 3/8 x 24 threaded base

Features

Antennas

Approximate Length:
  • Less than 2 Ft.
Antenna Type:
Fiberglass
Mount Type:
  • 3/8 inch x 24

Reviews

arrived as described and in a timely manner
This antenna is a perfect fit for my lifted Jeep! Not to mention it has great reception. I have an AEV rear bumper with tire rack, and the antenna mount is at the top. I no longer have to remove my antenna before pulling into the garage.
I have this installed on a Jeep. It does the same thing as these 8 foot whips without hitting the trees.
Performs as I expected as one should realize that there can possibly be a performance compromise with a shorter antenna. Tunes fairly easily. Initial use indicates decent reception. Not sure of transmission range but received confirmation on first radio check so it does work and get out. As I have only used it a few days, I am rating it good for my expected probable limitations as it is fulfilling my intended uses and expectations for something of it's size. The main advantages are that it is short and you can tune it.
I BOUGHT THIS ANTENNA AS A REPLACEMENT FOR THE ONE I HAD THAT I COULD NO LONGER ADJUST. THIS IS A GREAT ANTENNA, SMALL, EASILY ADJUSTED AND LOOKS GOOD TOO. ANOTHER GOOD POINT, IT WORKS. WOULD NOT HESITATE TO PURCHASE ANOTHER IF NEEDED.
This short antenna works great! I had a need to relocate the CB antenna on a Honda Gold Wing motorcycle. After moving the stock antenna, I found it was too tall to fit under most garage doors. Before replacing the stock antenna with this one, I was able to perform power readings at various distances. I found that this antenna, when mounted in the same location as the relocated stock antenna, actually performed better. Very happy!
Low SWR, but due to it's size has no long range coverage only good for about 3 city blocks with no obstacles.
Write a review