9' (2.7) RG58AU PL259 TO FIRE-RING W/STUD
If you already have an existing mount or surface with a 1/2 inch hole, this CB antenna stud and coax kit will provide everything else you need to mount a CB antenna and connect it to your radio. The high quality CB coax in this kit is available in 9 or 18 foot lengths.
- 9' or 18' Hi quality FireRing coax with K4 stud
- Stud mount hardware made from stainless steel
- "Fire-Ring" connector is weatherproof, low-profile and easy to install
- Can be installed below the mount surface, on top of the mount surface, or try installing it under headliners or where space is limited.
- Available with 9' (2.7m) or 18' (5.5m) lengths of high quality coax. For specific information on the Fire-Flex coax with the Fire-Ring.
The coax connector is loose and is a solder on type to allow for easy routing of cable during installation. It also has a built in nylon shoulder washer to keep it centered and short free.
No posts found