8" TALL KWIK TUNE CB ANTENNA WITH 3/8"X24" THREADED BASE. TUNING RINGS MAKES ADJUSTING SWR EASY.
The PC108 8 Inch Adjust-A-Match Tunable Antenna from ProComm is an excellent fiberglass CB antenna for use when a low profile is an absolute must.
This is our shortest CB antenna at 8 inches. When installed correctly, this antenna will achieve good operating SWR. At only 8 inches, the PC108 antenna's range will be limited.
If you are in need of the ultimate low profile, very low clearance antenna the PC108 is definitely worthy of your consideration. The PC108 make a great Off-road antenna for club tours where maximum radio range is not a high priority. In fact our customers who have installed the PC108 on their Jeeps report excellent reception and durability with this easy to tune antenna.
The PC 108 CB antenna is rigid, so it can't stand up to striking objects well. This can be countered with a light spring if mounting above the roof line of your vehicle. A 3/8" x 24 threaded base ensures that the PC108 is ready to install on any standard antenna mount.
27 MHz CB radio frequencies
Fully compatible with standard antenna mounting studs threaded for 3/8 x 24
Choosing the right spring to match your antenna and mounting requirements is not always cut and dried. Even the shortest antenna such as the PC108, may benefit from having a light duty spring installed. For complete information on CB antenna springs visit CB World;s help center.
A high performance CB radio installation requires low noise coax cable such as ProComm RG58 PLxj coaxial cable. Be sure to match your antenna stud to the correct coax connector for your installation.
Tune your antenna
Tuning your CB antenna for a low SWR setting is the best way to guarantee two-way radio performance and protect circuitry from damage. Antenna tuning is not a complicated process, but it is worth performing this task correctly.
25 watt rated
- 8 inch fiberglass based loaded CB antenna
- Ring tunable - no trimming of antenna necessary
- Pre-tuned to 27 MHz
- Field tunable for best performance
- Designed for low SWR
- Chrome plated 3/8 x 24 threaded base
No posts found