The BC23A 15 Watt Amplified Communication Speaker from Uniden provides a powered solution for CB radios, scanners and many other communication receivers. A great solution when clear audio is a necessity. The Uniden BC23A lets you easily hear the conversation over the noise of the road.
The BC23A provides 15 watts of amplified power. An external speaker that is tough, powerful, and you know you are getting Bearcat quality. Matched to Uniden brand radios and communication products this speaker can be mounted to any flat surface with the included bracket and hardware. The BC23A speaker is compatible with all brands of radio receivers.
In the box you'll find a high quality 15 watt Uniden amplified speaker, mounting bracket, mounting screws, 10 feet of wiring, and printed instructions.
The BC23A amplified speaker requires a DC power source with 11.7 to 15.8 volts. The Uniden BC23A does not support DC24V power sources. You will need to attach the power directly to your battery or a power supply like the PS3.
Remove unwanted background noise from incoming transmissions with the noise filter button. On the side volume control knob allows for user ease of adjustment. You'll obtain optimum listening that you can be tuned to the conditions.
The Uniden BC23A is the right speaker solution when you want to the sound of the conversation to suit your taste.
- Internal 15 Watt speaker 8 ohm (MONO)
- 8 watt amplifier
- Volume Control
- Noise blanker for clear audio
- 3.0 inch speaker
- Frequency response: 300Hz-5kHz
- Works with CB's, scanners, and other communication receivers
- 10 Foot speaker wire with 3.5mm jack
- 10 foot fused power wire & ground wire
- Dimensions: 3.9 inches wide x 2.4 inches deep x 3.9 inches high
Please note that this amplified speaker needs to be connected to power to get any sound. It will not work by simply plugging the speaker into the 3.5mm jack on your radio.
No posts found