SS6 - Firestik 3 Way Stainless Steel Mirror Mount For 3/8"X24 Threaded Antennas- No Antenna Stud
This is a stainless steel version of one of our most popular mounts! The mounting clamp can be positioned horizontally for horizontal mirror arms and rails, or vertically for vertical mirror arms or rails. The clamp may be omitted, which will allow the angle bracket to be used as a side bracket on any flat vertical surface, such as the side of a motor-home or back of a Jeep.
This mount has different versions:
The SS6 does not include the antenna stud muont.
The SS64 is complete with a heavy-duty K4 stud mount with ring terminal connections.
The SS64A model has the world famous K4A stud mount with screw on coaxial termination.
All models come complete with stainless steel mounting hardware. These mounts are also available in a less costly chrome plated version. Use one of the 3-Way Mounting Brackets for single or dual antenna installation on your car, truck, van, motorcycle or motor-home. If a strong structure is available, these mounts will easily support antennas up to 5' (1.5m) in length. The actual size of the bracket is 2.25" (57mm) wide by 2.9" (74mm) high. With the stud in place, the over all height is 4.2" (107mm). They protrude outward from the vertical surface 1.9" (48mm). With the standard bolts supplied with the bracket, you can install it on a tube with a diameter up to 0.850" (22mm). If longer bolts are used, the maximum tube diameter is 1.5" (38mm).
Additional Info 1
No posts found