METRA - 12 VOLT, 10 AMP NOISE FILTER FOR FILTERING INDUCED NOISE FROM ALTERNATORS AND OTHER IGNITION SOURCES
If your CB radio or audio equipment is experiencing noise from electrical interference (such as from your engine) this Noise Filter is a compact solution. This will be installed in between your radio and the power source. The single red connects to the radio. The black is ground (most people connect to the ground on their battery) and the blue (next to the black) connects to the vehicle power. You will still need to make sure that your radio is grounded, either by mounting it to ground or connecting it to ground.
Measuring a minuscule 1-3/4"X1-1/4"X1" the Metra is a 10 AMP inline noise suppressor compatible with receivers, equalizers, and amplifiers.
To reduce noise/interference on the antenna side, check out the NR400, which also amplifies the incoming signal.
Check out our Help Center article that discusses noise interference and advice on how to help you get rid of it.
- Easily Installed
- 10 Amps in-line noise filter
- Reduces and/or Eliminates Engine Interference
- Works well on Wiper and Heater Motor Interference
- Compatible w/ Receivers, Equalizers, Scanners, & Amplifiers
If we are out of stock on this item, check out the AWNSFL
No posts found